1-102974-0 Datasheet, PDF (61/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
Application Tooling for Compliant Pin Connectors
ASG Servo Electric Presses
for Compliant Pin
Connectors
TE offers the ASG line of
servo electric presses for
the application of compliant
pin products. Systems are
available in a wide range of
pressing forces, board size
capabilities and automation
levels to meet almost any
applications requirements.
Each system utilizes a servo
electric motor with PC con-
trol. Coupled with force and
distance monitoring and
control, the entire line pro-
vides 100% quality assur-
ance in real-time with SPC
data collection capabilities.
Automatic set up and a
graphical operator interface
help provide intuitive opera-
tion to help reduce common
and costly operator errors.
Press Force Monitoring for Scrap Avoidance
Every TE ASG servo press
utilizes real-time force and
distance monitoring and
control. This allows the
press to identify an error
and react throughout the
press stroke. Common
problems such as PCB
holes above\below specifi-
cation and sometimes bent
pins can be detected by
monitoring both minimum
and maximum force param-
eters. Common operator
error such as improperly
placed connectors, miss-
ing\incorrect connector or
tooling can also be found
by monitoring premature or
missing force parameters.
In each case, the system
can stop during the press
cycle to avoid costly scrap
and rework.
Product Line Overview
3
System Type
Force Capability
Board Size Capability
BMEP
Benchtop
Semi-Automatic Press
Up to 5 Tons
[44 kN]
Up to 18" x 24"
[460x610 mm]
MEP
Stand-Alone
Semi-Automatic Press
Up to 12 Tons
[107 kN]
Up to 30" x 36"
[760x915 mm]
AEP 6T
Stand-Alone
Automatic Press
Up to 6 Tons
[53 kN]
Up to 30" x 36"
[760x915 mm]
AEP 12T
Stand-Alone or
Inline Automatic Press
Up to 12 Tons
[107 kN]
Up to 36" x 48"
[915x1220 mm]
Please contact the Tyco Tooling Assistance Center at 1-800-722-1111 for help with choosing the correct press and tooling to meet your application needs.
See Catalog 1309329 for more information on this equipment.
1307819
CIS WR 08/2011
te.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
61
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666