1-102974-0 Datasheet, PDF (152/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
ACTION PIN Post
Replacement Tooling
Rear Insertion/Extraction Tool
No. 265871-7 (Ref. 408-2636)
Includes:
Impact Tool No. 380392-8
Removal Tool No. 265964-1
Replacement Tip No. 308554-1
Application Tooling for AMPMODU Headers with ACTION PIN Posts
Single-Row Connector
Seating Tools
Tooling Assembly No. 91171-1
is used to install single-row
AMPMODU headers with
ACTION PIN posts into
PC boards.
Pin headers with
ACTION PIN posts allow
high speed, solderless
back-plane construction
through press-fit applica-
tion. Press fitting connectors
to printed circuit boards
requires special seating
tools which transfer applica-
tion force directly to the
contacts.
Force applied to the tool
to seat the connectors
can be provided by the TE
seating machines shown on
this page.
For tooling information,
call the TE Automation
Group 1-800-722-1111.
Double-Row Connector
Seating Tools
Header Size
Tool
(No. of Pos.) Assembly No.
4
91170-1
6
91170-1
8
91170-2
12
91170-5
14
91170-6
16
91170-7
20
91170-9
24
1-91170-1
30
1-91170-4
36
1-91170-7
40
1-91170-9
50
2-91170-4
60
2-91170-9
80
3-91170-2
96
3-91170-5
100
3-91170-6
120
3-91170-8
140
4-91170-0
200
4-91170-2
Triple-Row Connector
Seating Tools
Header Size
Tool
(No. of Pos.) Assembly No.
96
91169-8
105
91169-6
120
91169-7
150
91169-3
195
91169-2
204
91169-1
210
91169-5
300
91169-9
5
BMEP 5T
ASG Servo Electric Presses
TE offers a wide range of
servo-electric presses for
the application of press-fit
connectors. Systems are
available with varying force
capacity, board size capac-
ity and process capability.
Each system features real-
time force feedback and PC
control to allow the highest
level of control and trace-
ability. Every connector
pressed is monitored to con-
firm that maximum force is
not exceeded and minimum
force is met. Each system
controls force, height and
speed to allow termination
of the pressing cycle by
force or height parameters.
Complete SPC data is avail-
able as each connector
press cycle is monitored
and stored.
Please see the matrix
below and contact TE
Automation Group at 1-800-
722-1111 for assistance in
understanding which system
will best meet your needs.
AEP 6T
Press Model
BMEP 3T
BMEP 5T
MEP 6T
MEP 12T
AEP 12T
AEP 6T
Description
Semi-automatic, benchtop
servo-electric press
Semi-automatic, benchtop
servo-electric press
Semi-automatic, stand-alone
servo-electric press
Semi-automatic, stand-alone
servo-electric press
Automatic, inline
servo-electric press
Automatic, stand alone
servo-electric press
Max Pressing Force
tons [kN]
3 [26.7]
5 [44.5]
6 [53.4]
12 [106.8]
12 [106.8]
6 [53.4]
Max Board Size (L x W)
in [mm]
18 x 24 [460 x 610]
18 x 24 [460 x 610]
24 x 36 [610 x 914]
30 x 36 [ 762 x 914]
36 x 48 [914 x 1219]
30 x 36 [762 x 914]
152
1307819
CIS WR 08/2011
te.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666