1-102974-0 Datasheet, PDF (253/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
Interchangeable Contacts, Wire Crimp (Snap-In)
Material and Finish
Copper alloy C7025, plated as follows:
Plating A — Duplex plated .000030
[0.00076] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating B — Duplex plated .000015
[0.00038] min. gold on contact area,
.000050 [0.00127] min. tin in crimp
area, with entire contact underplated
.000050 [0.00127] min. nickel
Plating C — .000100 [0.00254] min.
tin over .000050 [0.00127] min. nickel
on entire contact
Short Point Receptacles
.068
[1.73]
.460
[11.68]
.060
[1.52]
Keying Plug
Part No. 104072-1
Ten plugs are supplied per strip.
Order quantity reflects the number
of strips required.
C
C
.012
[0.30]
Gap
Extraction/Lance Reset
Tool No. 843477-1
Related Product Data
Performance Characteristics —
page 221
Housings used in —
Short Point—pages 223, 224
AMPMODU MTE Unloaded
Housings — pages 228-233
Application Tooling—
pages 270-272
Technical Documents —
pages 277, 278
Product Specification
108-1472, 108-1472-1
Application Specification
114-25038
Section C - C
5
Wire Size
Range
AWG
[mm²]
Ins.
Dia.
Range
32-28
0.03-0.08
.025-.060
0.64-1.52
26-22
0.13-0.3
.025-.060
0.64-1.52
24-20
0.2-0.5
.025-.060
0.64-1.52
Finish
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Plating A
Plating B
Plating C
Contact Part No.
(Standard Pressure)
Strip Form Loose Piece
1-104481-1
1-104481-0
5-104481-2
1-104480-3
1-104480-2
1-104480-7
1-104479-0
104479-9
104479-8
1-104481-3
1-104481-2
5-104481-6
1-104480-6
1-104480-5
1-104480-4
1-104479-3
1-104479-2
1-104479-1
Heavy Duty Miniature
Applicator for
AMP-O-LECTRIC
Machine*
567296-2
Applicator for
AMP-O-MATIC
Stripper/Crimper
Machine
466980-1
567297-2
466981-1
567298-2
466982-1
Hand
Tool
Nos.
91518-1
91518-1
91551-1
*For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown
on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Note: These wire crimp contacts can be intermixed with insulation displacement crimp contacts.
1307819
CIS WR 08/2011
te.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
253
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666