1-102974-0 Datasheet, PDF (301/321 Pages) Tyco Electronics – AMPMODU Interconnection System

For Crimp Snap-In
Receptacles and Locking
Clip Contacts (Continued)
AMPMODU Interconnection System
Application Tooling (Continued)
AMP-O-MATIC Stripper-
Crimper Machines,
854040-3, -4
Semiautomatic bench
crimping machines that also
strip the wire, and are
therefore used for
terminating jacketed cable.
Feature manual precision
adjustment of crimp height,
keyed strip blades for faster,
more accurate setups, and
an efficient scrap removal
system. All adjustments can
be made from the front of
the machines without
special tools. Available with
crimp quality monitoring.
Specifications
Width—14 [355]
Depth—18 [457]
Height—33 [838] without reel
Weight—150 lb [68 kg]
Electrical—120 VAC, 50 or
60 Hz, .5 A
Air—80-100 psi [5.52-6.90 bar],
3.5 scfm [0.00165 m³/s]
Wire Range—32-14 AWG
[0.03-2 mm²]
For more information, request
Catalog 65004, Video 198075,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Stripper-Crimper
Applicators (coded SCA)
Interchangeable applicators
for crimping products in
AMP-O-MATIC Stripper-
Crimper Machines. Consist
of separate ram and lower
tooling assemblies. Similar
dial-in settings for different
wire sizes and insulation
diameters as HDM
applicators. Available with
sensors for use with the
Crimp Quality Monitor.
For more information, request
Catalog 65004 (AMP-O-MATIC
Stripper-Crimper Machines),
Catalog 82275 [Crimp Quality
Monitor (CQM)].
Kappa 235, Automatic Cut
and Strip, 3-547178-1
The Kappa 235 has the
capability of processing
wires with a cross section of
up to 4 AWG and an outside
diameter of 0.59 inch.
Options include an inner
conductor processing kit for
multiconductor cables and
a flat ribbon cable kit.
Specifications
Width—25 [630]
Depth—16 [490]
Height—13.4 [370]
Weight—95 lb [44 kg]
Wire Cross-Sections—
24-4 AWG [0.22-25 mm²]
Flat Ribbon Cables—width up
to 40mm
Length Range—0.04”-328ft
[1mm - 99.99m] (+/- 0.2%)
Electrical—110/230 V -
50/60Hz, switches automatically
Cosmic 927R
Micro-Cable Stripper
The Cosmic 927R
Micro-Cable Stripper was
developed to reliably strip
various insulation materials
and micro-cable. From
conductor diameter 36 AWG
to 10 AWG, the stripping
diameter display can be set
to within 0.1mm increments.
Thus optimal stripping
quality is guaranteed and
damage to the conductor is
eliminated.
7
Note: All part numbers are RoHS
compliant.
Note: For additional tooling options, contact TE or reference the TE web site.
1307819
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
301
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666