1-102974-0 Datasheet, PDF (269/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
Mini-Tandem Spring Contacts
Receptacle Contacts
Material and Finish
Phosphor bronze, plated as follows:
Plating A — Duplex plated .000030
[0.00076] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating B — Duplex plated .000015
[0.00038] gold inlay on contact area, matte
tin in crimp area, with entire contact
underplated .000050 [0.00127] nickel
Plating C — Duplex plated .000050
[0.00127] over matte tin in contact area,
over .000030 [0.00076] nickel on entire
contact
Plating D — .000100 [0.00254] min.
matte tin over .000030 [0.00076] nickel on
entire contact
.060
[1.52]
.085
[2.15]
Min.
Contact
Area with
Gold Inlay
.060
[1.52]
Technical Documents —
pages 277, 278
Product Specification
108-25031
Application Specification
114-25021
Low Pressure Contacts
Wire Size Range
AWG
mm²
Ins. Dia.
Range
26-22
0.14-0.32
0.36-0.54
[0.64-1.37]
Finish
Plating A
Plating B
Contact Part No.
Strip Form Loose Piece
5531216-3 5531216-4
5531216-1 5531216-2
Miniature
Applicator for
Applicator for AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
466819-2
466943-1
Standard Pressure Contacts
Wire Size Range
AWG
mm²
Ins. Dia.
Range
32-28
0.03-0.08
.025-.054
[0.64-1.37]
26-22
0.14-0.32
.036-.054
[0.91-1.37]
Finish
Plating B
Plating C
Plating D
Plating B
Plating C
Plating D
Contact Part No.
Strip Form Loose Piece
530901-2
5530901-6
5530901-4
5530553-4
5530553-6
5530553-2
530901-3
5530901-7
5530901-5
—
—
—
Miniature
Applicator for
Applicator for AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
466723-1
466952-1
466819-2
466943-1
5
High Pressure Contacts
Wire Size Range
AWG
mm²
32-28 0.03-0.08
26-22 0.14-0.32
Ins. Dia.
Range
.025-.054
[0.64-1.37]
.036-.054
[0.91-1.37]
Finish
Plating B
Plating B
Contact Part No.
Strip Form Loose Piece
Miniature
Applicator for
Applicator for AMP-O-MATIC
AMP-O-LECTRIC Stripper/Crimper
Machine*
Machine
5531225-6
—
466723-1
466952-1
5531224-6
—
466819-2
466943-1
*For use with AMP-O-LECTRIC Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-522-6752)
for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as
other bench machines and fully automatic AMPOMATOR lead making machines.
Notes: 1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268.
They cannot be used in AMPMODU Mod IV Housings.
2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above.
3. Application tooling is described on pages 270 & 275.
1307819
CIS WR 08/2011
te.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
269
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666