1-102974-0 Datasheet, PDF (311/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
Performance Specifications
Dual In-Line Package (DIP) Shunts — 7600 Series
Current Rating —
Standard pressure — 2 amperes for +20˚C rise above ambient (one conductor per shunt
Machine insertable — 1 ampere for +20˚C rise above ambient (one conductor per shunt)
Insulation Resistance — 1x 10¹⁰ ohms min. at 100 VDC
Dielectric Withstanding Voltage — 500 VDC min.
Capacitance — 2 picofarads max. between adjacent straps
Temperature Rating — -55˚C to +105˚C
Terminal Strength (Bend Test) — Two 45˚ bend cycles per MIL-STD-202, Method 211, Condition B
Solder Bridging —
Cut straps can be reconnected by solder bridging. Solder bridging recommendations are:
•Use low temperature solder (60/40 tin/lead)
•Use solder tip approximately 1/32 [0.79] in diameter
•Do not let solder tip come in contact with plastic material
Post Shunts
Current Rating —
3 amperes max. unless otherwise noted
Temperature Rating — -65˚C to +105˚C (gold) -40˚C to +85˚C (tin)
Technical Documents
Various technical documents are available for your use:
Product Specifications describe technical performance characteristics and verification
tests. They are intended for the Design, Component and Quality Engineer.
108-7533
108-1445
108-1476
108-1674
108-9057
108-9062
108-37006
Dual In-Line Package (DIP) Shunts
2mm Mini Shunt
Economy Shunt, Multiposition Shunt
Dual Beam Shunt
Low Profile Shunt
Tandem Spring Shunt
Novo Shunt with Handle
Application Specifications describe requirements for using the product in its intended
application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
114-1045
114-1054
114-1059
114-1074
Tandem Spring Shunt
Dual In-Line Package (DIP) Shunts
Economy Shunt, Dual Beam Shunt, Low Profile Shunt, Multiposition
Shunt
2mm Mini Shunt
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-7768
408-3208
408-3230
408-3251
408-3276
Dual In-Line Package (DIP) Shunts
Tandem Spring Shunt
Economy Shunt, Dual Beam Shunt, Low Profile Shunt
Multiposition Shunt
2mm Mini Shunt
8
1307819
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
311
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666