1-102974-0 Datasheet, PDF (205/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Material
Black thermoplastic, flame retardant
Part Numbers
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data
Low Profile Headers used with —
pages 135-140
.335
[8.51]
.134
[3.40]
Break Line
(See below.)
.335
[8.51]
Break Line
(See below.)
.134
[3.40]
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
5
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
Break Line
Note: For Post Shunts, contact TE.
1307819
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
205
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666