61312-2 Datasheet, PDF (60/76 Pages) Tyco Electronics – Machine Applied Terminations, Open Barrel Terminals

Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Contact and Welding Tab Terminals
Product Facts
I Welding Tab terminals
available for 26 -14 AWG
lead wire
I Brush contacts available for
24–14 AWG lead wire
I Button contacts available for
20–16 AWG lead wire
I Grounding clip terminals
accept .019 - .071 panel
thicknesses
I Non-insulated Wire Pins
available for lead wires
ranging from 10 to 22 AWG
lead wire
I Non-insulated Wire Pins
available for magnet wire
leads ranging from 13–27
AWG
I Precision formed, strip-fed
terminals terminated in
AMP automatic machines
for high production rates per
hour
Technical Documents
Application Specifications describe
requirements for using the product in its
intended application and or crimping
information. They are intended for the
Packaging and Design Engineer and the
Machine Setup Person.
114-2093 — Carbon Brush Contacts
114-2129 — Grounding Clip
Product Specifications
Product Specifications describe the
product qualification test results com-
pleted by Tyco Electronics for considera-
tion of product use in a specific
application. They are intended for the
Design and Product Reliability Engineer.
108-1376 — Grounding Clip
Tyco Electronics offers a
full selection of AMP open
barrel miscellaneous contact
and welding tab terminals
that are specifically
designed to terminate
various stranded and solid
lead wire ranges for cus-
tomer specific application
requirements.
Welding tab terminals are
available with and without
insulation support barrels
that terminate 26–14 AWG
lead wire. They are manu-
factured in brass, phosphor
bronze and steel material
with tin, nickel and gold
plating options available.
Brush contacts are manu-
factured without insulation
support barrels, one part
number being the excep-
tion, that terminate 24–14
AWG lead wire. They are
manufactured in brass and
phosphor bronze material
with silver plating as an
option.
Button contacts are avail-
able with and without insu-
lation support barrels that
terminate 20 -16 AWG lead
wire. They are manufac-
tured in brass material with
tin plated versions available
as well.
Grounding clip terminals
are available that can be
terminated to 22–14 AWG
lead wire and accept panel
thickness ranging from
.019–.071. They are
designed to pierce through
enameled painted sheet
metal panels in the appli-
ance and lighting industry.
They are manufactured out
of stainless steel or tin
plated phosphor bronze
and steel material.
Special Tab Receptacles
are available without insula-
tion support barrels that can
be terminated to 20–16
AWG lead wire. They are
manufactured in brass,
phosphor bronze and steel
with tin and silver plated
version available.
A Plug Blade terminal is fea-
tured and readily available
to terminate 20–18 AWG
lead wire in brass material.
Fuse terminals are available
for .250 [6.5] diameters
without insulation support
that can be terminated to
22–10 AWG lead wire.
They are manufactured in
brass material with tin
plated brass as an option.
Wire Strain Relief Clamps
are available for insulation
diameters ranging from
.150–.310. They are manu-
factured in aluminum, phos-
phor bronze and tin plated
steel.
A .250 Spark Plug
Receptacle is available that
is manufactured in nickel
plated steel.
A Thermal Protector Crimp
Pin is featured that can be
terminated directly to a ther-
mal protector open barrel
that will accept 16-14 lead
wire. The terminal is manu-
factured in tin plated brass.
Non-insulated Wire Pins are
readily available for lead
wires ranging from 10 to 22
AWG lead wire. They are
manufactured in copper
zinc with pre-plated and
post plated tin and silver
plated versions options
listed. Nickel plated steel
terminals are also featured.
Non-insulated AMPLIVAR
Wire Pins with insulation
supports are available to
terminate directly to magnet
wire leads ranging from
13–27 AWG. They are man-
ufactured in brass with pre-
plated and post tin plated
versions available.
60
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967