61312-2 Datasheet, PDF (39/76 Pages) Tyco Electronics – Machine Applied Terminations, Open Barrel Terminals

Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
MTM Crimpband Splices
Product Facts
I Made from a continuous coil
of “Ribbon Connector”
material
I Magnet wires MTM
Crimpband splices have
machine-piercing serrations
designed for displacing
magnet wire insulation
I Available in brass, tin-
plated brass, and copper-
nickel alloy material
I Make parallel or pigtail
connections on same
machine
I 100% of Crimpband
material is used in scrap
free terminations
I Crimpband material coupled
with appropriate toolsets
accommodate specific
CMA ranges
I Produced in Tyco Electronics
equipment on your
production floor
I Meets UL 486C crimp
tensile requirements
Applications
I Motors windings and
connections
I Coil connections
I Transformer windings and
connections
I Lighting ballasts
I Power supplies
Mod I
Tyco Electronics features
the AMP MTM Crimpband
system that is comprised of
two key features: the semi-
automatic termination
machine and a reel of MTM
Crimpband material.
In a one-step crimping
operation, the machine
feeds, cuts, forms and
crimps the material to
provide a low-cost, high
reliability crimp connection.
The MTM Crimpband
splices are formed during
the crimping process from
Cut
Formed
Crimped
machined longitudinal
grooved material that pierces
magnet wire varnish film
insulation during crimping.
MTM Crimpband splices
are specifically designed to
terminate magnet wire to
itself or in combination with
standard solid or stranded
lead wire.
Three magnet wires
maximum can be
terminated together with
stranded lead wire in one
splice.
Mod III
Tyco Electronics provides a
wide range of toolset types
and Crimpband splices to
meet various production
requirements.
Depending on your
specific application, MTM
Crimpband splices are
available in 7, 9, 11 and 13
serration versions for
terminations in the 400 to
13,000 CMA range.
When aluminum magnet wire
is used, MTM Crimpband
splices must be tin plated.
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
39
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967