61312-2 Datasheet, PDF (31/76 Pages) Tyco Electronics – Machine Applied Terminations, Open Barrel Terminals

Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices
Product Facts
I Made from a continuous coil
of “Ribbon Connector”
material
I RTM Crimpband have
grooved serrations for
improved axial retention
I Available in brass, tin-plated
brass and copper-nickel
alloy (CA725) material
I Make parallel or pigtail
connections on same
machine
I Used for electrical and
non-electrical connections
I 100% of RTM Crimpband
material is used in scrap
free terminations
I Crimpband material coupled
with appropriate toolsets
accommodate specific CMA
ranges
I Produced in Tyco Electronics
equipment on your
production floor
I Meets UL 486C crimp
tensile requirements
Applications
I Stranded and solid
wire-to-wire connections
I Light bulb LED assembly
I Switch lead assembly
I Resistor lead assembly
I Printed circuit board lead
assembly
I Flex-film lead assembly
I Glass reed switch lead
assembly
Mod I
Tyco Electronics features
the AMP RTM Crimpband
system that is comprised
of two key features: the
semi-automatic termination
machine and a reel of
RTM Crimpband material.
In a one-step crimping
operation, the machine
feeds, cuts, forms and
crimps the material to
provide a low-cost, high
reliability crimp connection.
The RTM Crimpband
splices are formed during
the crimping process from
Cut
Formed
Crimped
milled longitudinal groove
material that produce rolled,
rounded serrations.
They are designed to
terminate pre-stripped
stranded and solid wire
conductors together as well
as wire conductors to switch
tabs, resistors, printed
circuit board, flex circuit and
light bulb LED and glass
reed switch assemblies, etc.
The flexibility of the RTM
Crimpband system provides
opportunity for use in
custom applications for
Mod III
either electrical and / or
mechanical connections.
Tyco Electronics provides a
wide range of toolset types
and crimpband splices to
meet various production
requirements.
Depending on your specific
application, RTM Crimpband
splices are available in 3, 6,
7, 8, 9, 10 14 and 20 ridge
serration versions for
terminations in the 170 to
13,000 CMA range.
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
31
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967