61312-2 Datasheet, PDF (3/76 Pages) Tyco Electronics – Machine Applied Terminations, Open Barrel Terminals

Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Introduction
Operating Temperatures of
Materials and Finishes
Brass, phosphor bronze and
steel are the normal materi-
als for Tyco Electronics
terminals. Various finishes
are available.
Brass
Plain
Allowable Connection
Temperature: 110°C.
Plain brass is used fre-
quently, where applications
have optional environmental
conditions.
Tin Plated
Allowable Connection
Temperature: 110°C.
Tin plating of receptacle
and tab creates satisfactory
operation at higher temper-
atures, and in addition pro-
tects the connection against
corrosion.
Silver Plated
Allowable Connection
Temperature: 130°C
Silver plated connections
allow the highest operating
temperature for brass and a
higher current carrying
capacity than plain and tin
plated brass.
Phosphor Bronze
Plain
Allowable Connection
Temperature: 110°C
Phosphor bronze is used in
applications where brass
would normally be cor-
roded, for example the vari-
ous freezing mixtures and
ammonias.
Tin Plated
Allowable Connection
Temperature: 110°C
Tin plated phosphor bronze
for higher temperatures;
additional corrosion protec-
tion over plain phosphor
bronze.
Silver Plated
Allowable Connection
Temperature: 130°C
Silver plated connections
allow the highest operating
temperature for phosphor
bronze and higher current
carrying capacity than plain
and tin plated phosphor
bronze.
Steel
Nickel plated
Allowable Connection
Temperature: 250°C
This combination allows a
reliable connection at high
temperatures, for example
in stoves, cooking appli-
ances, etc. To assure opti-
mum performance, these
nickel-plated receptacles
are used with compatible
lead wires and wires and
tabs that can be welded to
heating units.
Many part numbers are
recognized under the
Component Program
of Underwriters
Laboratories, Inc., ^R
File No. E13288 and
File No. LR 7189.
Certified by
Canadian Standards ^R
Association.
Contact Tyco Electronics
customer service for a
specific part number inquiry.
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all Tyco Electronics prod-
ucts. They can provide you
with:
I Technical support
I Catalogs
I Technical Documents
I Product Samples
I Tyco Electronics
Authorized Distributor
Locations
Instant Information by the
Tyco Electronics FAX Service
24 hours a day…
Call Technical Support and
choose the Tyco Electronics
FAX service option at the
voice prompt. The informa-
tion you request will be
faxed to you within a
few minutes. From the
Tyco Electronics FAX
service you get:
I Drawings (the drawing
number in this case is the
part number)
I Instruction Sheets
I Product Specifications
I Latest Revisions of Catalog
Pages. (You will be
prompted to enter any part
number on the old catalog
page. The Tyco Electronics
FAX service will then fax you
the latest catalog page(s)
covering this part.
I The list of your closest
distributors
I Instructions on how to
use the Tyco Electronics
FAX service
© Copyright 1989, 1995 and 2004 by
Tyco Electronics Corporation. All
International Rights Reserved.
AMP, AMPLIVAR, AMP-O-LECTRIC,
AMPOMATOR, SHUR-PLUG, and TYCO
are trademarks.
Specifications subject to change.
Consult Tyco Electronics for latest
design applications.
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
3
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967