ISL68134_16 Datasheet, PDF (50/50 Pages) Intersil Corporation – Digital Dual Output, 7-Phase Configurable PWM

ISL68134
Package Outline Drawing
L40.5x5D
40 LEAD THIN QUAD FLAT NO-LEAD PLASTIC PACKAGE
Rev 0, 9/10
5.00
AB
6
PIN 1
INDEX AREA
For the most recent package outline drawing, see L40.5x5D.
4X 3.60
36X 0.40
6
PIN #1 INDEX AREA
(4X) 0.15
TOP VIEW
40X 0.4± 0.1
BOTTOM VIEW
b ^0.20
4
0.10 M C A B
PACKAGE OUTLINE
0.40
0.750
0.050
(36X 0.40)
SIDE VIEW
SEE DETAIL "X"
// 0.10 C
BASE PLANE ^C
SEATING PLANE
0.08 C
(40X 0.20)
(40X 0.60)
TYPICAL RECOMMENDED LAND PATTERN
C ^{0.2 REF}
5
0.00 MIN
0.05 MAX
DETAIL "X"
NOTES:
1. Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2. Dimensioning and tolerancing conform to ASME Y14.5m-1994.
3. Unless otherwise specified, tolerance : Decimal ± 0.05
4. Dimension b applies to the metallized terminal and is measured
between 0.15mm and 0.27mm from the terminal tip.
5. Tiebar shown (if present) is a non-functional feature.
6. The configuration of the pin #1 identifier is optional, but must be
located within the zone indicated. The pin #1 identifier may be
either a mold or mark feature.
7. JEDEC reference drawing: MO-220WHHE-1
Submit Document Feedback ₅₀
FN8817.0
September 28, 2016