 English |
|
|
|
|
|
|
|
| X5083_06 Datasheet, PDF (14/21 Pages) Intersil Corporation – CPU Supervisor with 8Kbit SPI EEPROM | |||
| |||
| ◁ |
X5083
Absolute Maximum Ratings
Temperature Under Bias . . . . . . . . . . . . . . . . . . . . . .-65°C to 135°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to 150°C
Voltage on Any Pin with Respect To Vss . . . . . . . . . . . . . -1.0V to 7V
D.C. Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mA
Lead Temperature (Soldering, 10s) . . . . . . . . . . . . . . . . . . . . . 300°C
Operating Conditions
Temperature Range
Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to 85°C
VCC Range
-2.7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7V to 5.5V
Blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V to 5.5V
CAUTION: Stresses above those listed in âAbsolute Maximum Ratingsâ may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
DC Electrical Specifications (Over the recommended operating conditions unless otherwise specified.)
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
ICC1
VCC Write Current (Active)
SCK = VCC x 0.1/VCC x 0.9 @ 5MHz,
5
SO = Open
ICC2
VCC Read Current (Active)
SCK = VCC x 0.1/VCC x 0.9 @ 5MHz,
0.4
SO = Open
ISB1
VCC Standby Current WDT = OFF CS = VCC, VIN = VSS or VCC,
VCC = 5.5V
ISB2
VCC Standby Current WDT = ON CS = VCC, VIN = VSS or VCC,
VCC = 5.5V
ISB3
VCC Standby Current WDT = ON CS = VCC, VIN = VSS or VCC,
VCC = 3.6V
ILI
Input Leakage Current
VIN = VSS to VCC
ILO
Output Leakage Current
VOUT = VSS to VCC
VIL (Note 1) Input LOW Voltage
VIH (Note 1) Input HIGH Voltage
VOL1
Output LOW Voltage
VCC > 3.3V, IOL = 2.1mA
VOL2
Output LOW Voltage
2V < VCC ⤠3.3V, IOL = 1mA
VOL3
Output LOW Voltage
VCC ⤠2V, IOL = 0.5mA
VOH1 Output HIGH Voltage
VCC > 3.3V, IOH = -1.0mA
VOH2 Output HIGH Voltage
2V < VCC ⤠3.3V, IOH = -0.4mA
VOH3 Output HIGH Voltage
VCC ⤠2V, IOH = -0.25mA
VOLRS Reset Output LOW Voltage
IOL = 1mA
1
50
20
0.1
10
0.1
10
-0.5
VCC x 0.7
VCC x 0.3
VCC + 0.5
0.4
0.4
0.4
VCC - 0.8
VCC - 0.4
VCC - 0.2
0.4
UNIT
mA
mA
µA
µA
µA
µA
µA
V
V
V
V
V
V
V
V
V
Power-Up Timing
SYMBOL
PARAMETER
tPUR (Note 2) Power-up to read operation
tPUW (Note 2) Power-up to write operation
.
Capacitance TA = +25°C, f = 1MHz, VCC = 5V
SYMBOL
TEST
COUT (Note 2) Output capacitance (SO, RESET, RESET)
CIN (Note 2) Input capacitance (SCK, SI, CS, WP)
NOTES:
1. VIL min. and VIH max. are for reference only and are not tested.
2. This parameter is periodically sampled and not 100% tested.
MIN
MAX
8
6
MAX
1
5
UNIT
pF
pF
UNIT
ms
ms
CONDITIONS
VOUT = 0V
VIN = 0V
14
FN8127.3
June 15, 2006
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese