80C86_06 Datasheet, PDF (1/37 Pages) Intersil Corporation – CMOS 16-Bit Microprocessor

TM
80C86
August 22, 2006
CMOS 16-Bit Microprocessor
Features
• Compatible with NMOS 8086
• Completely Static CMOS Design
- DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8MHz (80C86-2)
• Low Power Operation
- lCCSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500μA Max
- ICCOP . . . . . . . . . . . . . . . . . . . . . . . . . 10mA/MHz Typ
• 1MByte of Direct Memory Addressing Capability
• 24 Operand Addressing Modes
• Bit, Byte, Word and Block Move Operations
• 8-Bit and 16-Bit Signed/Unsigned Arithmetic
- Binary, or Decimal
- Multiply and Divide
• Wide Operating Temperature Range
- C80C86 . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
- M80C86 . . . . . . . . . . . . . . . . . . . . . . . .-55°C to +125°C
Description
The Intersil 80C86 high performance 16-bit CMOS CPU is
manufactured using a self-aligned silicon gate CMOS pro-
cess (Scaled SAJI IV). Two modes of operation, minimum for
small systems and maximum for larger applications such as
multiprocessing, allow user configuration to achieve the
highest performance level. Full TTL compatibility (with the
exception of CLOCK) and industry standard operation allow
use of existing NMOS 8086 hardware and software designs.
Ordering Information
PACKAGE
TEMP.
RANGE
(°C)
8MHz
PART
MARKING
PKG.
NO.
PDIP
0 to +70 CP80C86-2 CP80C86-2 E40.6
0 to +70 CP80C86-2Z CP80C86-2Z E40.6
CERDIP -55 to +125 MD80C86-2/B MD80C86-2/B F40.6
SMD# -55 to [phone]QA 8405202QA F40.6
Pinouts
GND 1
AD14 2
AD13 3
AD12 4
AD11 5
AD10 6
AD9 7
AD8 8
AD7 9
AD6 10
AD5 11
AD4 12
AD3 13
AD2 14
AD1 15
AD0 16
NMI 17
INTR 18
CLK 19
GND 20
80C86 (DIP)
TOP VIEW
MAX
40 V_CC
39 AD15
(MIN)
38 A16/S3
37 A17/S4
36 A18/S5
35 A19/S6
34 BHE/S7
33 MN/MX
32 RD
31 RQ/GT0 (HOLD)
30 RQ/GT1 (HLDA)
29 LOCK (WR)
28 S2
(M/IO)
27 S1
(DT/R))
26 S0
(DEN)
25 QS0
(ALE)
24 QS1
(INTA)
23 TEST
22 READY
21 RESET
80C86 (PLCC, CLCC)
TOP VIEW
MAX MODE
80C86
AD10
AD9
AD8
AD7
AD6
AD5
AD4
AD3
AD2
AD1
AD0
MIN MODE
80C86
6 5 4 3 2 1 44 43 42 41 40
AD10 ⁷
39 _NC
AD9 ₈
38 A19/S6
AD8 9
37 BHE/S7
AD7 10
36 MN/MX
AD6 11
35 RD
AD5 12
34 HOLD
AD4 13
33 HLDA
AD3 14
32 WR
AD2 15
31 M/IO
AD1 16
AD0 ₁₇
30 DT/R
29 ^DEN
18 19 20 21 22 23 24 25 26 27 28
MIN MODE
80C86
NC
A19/S6
BHE/S7
MN/MX
RD
RQ/GT0
RQ/GT1
LOCK
S2
S1
S0
MAX MODE
80C86
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
141
FN2957.2