80960CF-40 Datasheet, PDF (31/77 Pages) Intel Corporation – 80960CF-40, -33, -25, -16 32-BIT HIGH-PERFORMANCE SUPERSCALAR EMBEDDED MICROPROCESSOR

A
80960CF-40, -33, -25, -16
Table 14. DC Characteristics (Sheet 2 of 2)
(80960CF-40, 33, -25, -16 under the conditions described in Section 4.2, Operating Conditions.)
Symbol
Parameter
Min
Max Units
Notes
I_LI1
Input Leakage Current for each pin except:
BTERM, ONCE, DREQ3:0, STEST,
EOP3:0/TC3:0, NMI, XINT7:0, BOFF, READY,
HOLD, CLKMODE
±15
µA 0 ≤ V_IN ≤ V_CC
(1)
I_LI2
Input Leakage Current for:
BTERM, ONCE, DREQ3:0, STEST,
EOP3:0/TC3:0, NMI, XINT7:0, BOFF
I_LI3
Input Leakage Current for:
READY, HOLD, CLKMODE
I_LO
Output Leakage Current
I_CC
I_CC
I_CC
I_ONCE
Supply Current (80960CF-40, 33):
I_CC Max
I_CCTyp
Supply Current (80960CF-25):
I_CC Max
I_CCTyp
Supply Current (80960CF-16):
I_CC Max
I_CCTyp
ONCE-mode Supply Current
80960CF-40
80960CF-33, -25, -16
0
– 300
µA V_IN = 0.45 V (2)
0
500
µA V_IN = 2.4 V (3,7)
±15
µA 0.45 ≤ V_OUT ≤
V_CC
1150
1000
mA (4)
mA (5)
950
mA ₍₄₎
775
mA ₍₅₎
mA
750
(4)
575
(5)
mA
225
150
C_IN
Input Capacitance for: CLKIN, RESET, ONCE,
0
READY, HOLD, DREQ3:0, BOFF, XINT7:0, NMI,
BTERM, CLKMODE
12
pF F_C = 1 MHz
C_OUT Output Capacitance of each output pin
12
pF F_C = 1 MHz (6)
C_I/O
I/O Pin Capacitance
12
pF F_C = 1 MHz
NOTES:
1. No pullup or pulldown.
2. These pins have internal pullup resistors.
3. These pins have internal pulldown resistors.
4. Measured at worst case frequency, V_CC and temperature, with device operating and outputs loaded to the test conditions
described in Section 4.5.1, AC TEST CONDITIONS.
5. I_CC Typical is not tested.
6. Output Capacitance is the capacitive load of a floating output.
7. CLKMODE pin has a pulldown resistor only when ONCE pin is deasserted.
PRELIMINARY
25