English
Language : 

80960JA Datasheet, PDF (1/77 Pages) Intel Corporation – EMBEDDED 32-BIT MICROPROCESSOR
80960JA/JF/JD/JT 3.3 V EMBEDDED
32-BIT MICROPROCESSOR
Product Features
Advance Information Datasheet
s Pin/Code Compatible with all 80960Jx
Processors
s High-Performance Embedded Architecture
—One Instruction/Clock Execution
—Core Clock Rate is:
80960JA/JF 1x the Bus Clock
80960JD 2x the Bus Clock
80960JT 3x the Bus Clock
—Load/Store Programming Model
—Sixteen 32-Bit Global Registers
—Sixteen 32-Bit Local Registers (8 sets)
—Nine Addressing Modes
—User/Supervisor Protection Model
s Two-Way Set Associative Instruction
Cache
—80960JA - 2 Kbyte
—80960JF/JD - 4 Kbyte
—80960JT - 16 Kbyte
—Programmable Cache-Locking
Mechanism
s Direct Mapped Data Cache
—80960JA - 1 Kbyte
—80960JF/JD - 2 Kbyte
—80960JT - 4 Kbyte
—Write Through Operation
s On-Chip Stack Frame Cache
—Seven Register Sets Can Be Saved
—Automatic Allocation on Call/Return
—0-7 Frames Reserved for High-Priority
Interrupts
s On-Chip Data RAM
—1 Kbyte Critical Variable Storage
—Single-Cycle Access
s 3.3 V Supply Voltage
—5 V Tolerant Inputs
—TTL Compatible Outputs
s High Bandwidth Burst Bus
—32-Bit Multiplexed Address/Data
—Programmable Memory Configuration
—Selectable 8-, 16-, 32-Bit Bus Widths
—Supports Unaligned Accesses
—Big or Little Endian Byte Ordering
s High-Speed Interrupt Controller
—31 Programmable Priorities
—Eight Maskable Pins plus NMI
—Up to 240 Vectors in Expanded Mode
s Two On-Chip Timers
—Independent 32-Bit Counting
—Clock Prescaling by 1, 2, 4 or 8
—lnternal Interrupt Sources
s Halt Mode for Low Power
s IEEE 1149.1 (JTAG) Boundary Scan
Compatibility
s Packages
—132-Lead Pin Grid Array (PGA)
—132-Lead Plastic Quad Flat Pack
(PQFP)
—196-Ball Mini Plastic Ball Grid Array
(MPBGA)
Notice: This document contains information on products in the sampling and initial production
phases of development. The specifications are subject to change without notice. Verify with your
local Intel sales office that you have the latest datasheet before finalizing a design.
Order Number: 273159-001
March, 1998