XC2361A Datasheet, PDF (89/123 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2361A, XC2363A, XC2364A, XC2365A
XC2000 Family Derivatives / Base Line
Electrical Parameters
4.4
System Parameters
The following parameters specify several aspects which are important when integrating
the XC236xA into an application system.
Note: These parameters are not subject to production test but verified by design and/or
characterization.
Table 20 Various System Parameters
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Supply watchdog (SWD)
supervision level
(see Table 21)
V_SWD
CC
V_LV - V_LV
0.15
V_LV + V
0.15
V_LV = selected
voltage in upper
voltage area
V_LV - V_LV
0.10
1)
V_LV + V
0.15
V_LV = selected
voltage in lower
voltage area
Core voltage (PVC)
supervision level
(see Table 22)
V_PVC CC V_LV - V_LV
0.03
V_LV + V
0.07²⁾
V_LV = selected
voltage
Wakeup clock source
frequency
f_WU CC 400 500 600 kHz FREQSEL=00_B
210 270 330 kHz FREQSEL=01_B
140 180 220 kHz FREQSEL=10_B
110 140 170 kHz FREQSEL=11_B
Internal clock source
frequency
f_INT CC 4.8
5.0
5.2
MHz
Short-term³⁾ deviation of df_INT CC -1
–
1
% Rel. to current
int. clock source frequency
start frequency
Startup time from
stopover mode
t_SSO CC 200 260 320 μs User instruction
from PSRAM
1) The limit V_LV - 0.10 V is valid for the OK1 level. The limit for the OK2 level is V_LV - 0.15 V.
2) This value includes a hysteresis of approximately 50 mV for rising voltage.
3) The short-term frequency deviation refers to a timeframe of 20 ms and is measured relative to the current
frequency at the beginning of the respective timeframe.
The short-term deviation with the duration of a LIN-frame allows error-free transmission.
Data Sheet
89
V2.0, 2009-03