XC2361A Datasheet, PDF (70/123 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2361A, XC2363A, XC2364A, XC2365A
XC2000 Family Derivatives / Base Line
Electrical Parameters
4
Electrical Parameters
The operating range for the XC236xA is defined by its electrical parameters. For proper
operation the specified limits must be respected during system design
4.1
General Parameters
These parameters are valid for all subsequent descriptions, unless otherwise noted.
Table 12 Absolute Maximum Rating Parameters
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Storage temperature
T_ST
-65 –
Junction temperature
T_J
-40 –
Voltage on V_DDI pins with V_DDIM, -0.5 –
respect to ground (V_SS) V_DDI1
Voltage on V_DDP pins with V_DDPA, -0.5 –
respect to ground (V_SS) V_DDPB
Voltage on any pin with V_IN
respect to ground (V_SS)
-0.5 –
Input current on any pin –
-10 –
during overload condition
150 °C –
150 °C under bias
1.65 V –
6.0 V –
V_DDP
+ 0.5
10
V
V_IN < V_DDPmax
1)
mA ¹⁾
Absolute sum of all input –
currents during overload
condition
–
–
|100| mA –
Output current on any pin I_OH, I_OL –
–
|30| mA –
1) One of these limits must be kept.
Keeping V_IN within the given limits avoids damage due to overload conditions.
Note: Stresses above the values listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only. Functional operation
of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for an extended time may affect device reliability.
During absolute maximum rating overload conditions (V_IN > V_DDP or V_IN < V_SS) the
voltage on V_DDP pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Data Sheet
70
V2.0, 2009-03