TC1791 Datasheet, PDF (82/153 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1791
Electrical ParametersGeneral Parameters
5.1.5 Operating Conditions
The following operating conditions must not be exceeded in order to ensure correct
operation and reliability of the TC1791. All parameters specified in the following tables
refer to these operating conditions, unless otherwise noticed.
Digital supply voltages applied to the TC1791 must be static regulated voltages which
allow a typical voltage swing of ± 5 %.
All parameters specified in the following tables (Table 19 and following) refer to these
operating conditions (Table 17), unless otherwise noticed in the Note / Test Condition
column.
The Extended Range Operating Conditions did not increase area of validity of the
parameters defined in table 11 and later.
Table 17 Operating Conditions Parameters
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Overload coupling factor K_OVAN −
−
0.0001
for analog inputs, negative CC
I_OV≤ 0 mA;
I_OV≥ -2 mA;
analog
pad= 5.0 V
Overload coupling factor K_OVAP −
−
0.0000
for analog inputs, positive CC
1
I_OV≤ 3 mA;
I_OV≥ 0 mA;
analog
pad= 5.0 V
Data Sheet
75
V 1.1, 2014-05