TC1791 Datasheet, PDF (72/153 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller

TC1791
PinningTC1791 Pin Configuration
Table 2
Pin Definitions and Functions (cont’d)
Pin Symbol
Ctrl. Type Function
G9,
V_SS
G10,
G11,
G12,
H9,
H10,
H11,
H12
-
-
Digital Ground (center balls cont’d)
T16, V_SS
U17,
W19
-
-
Digital Ground (outer balls)
L19, V_SS
L20,
Y17,
Y20
-
-
Digital Ground (outer balls)
A10, V_SS
A20,
B2,
B19,
D4,
D17,
E5,
E16,
K1,
Y11
-
-
Digital Ground (outer balls)
A1, Y1 N.C.
-
-
Not connected. These pins are reserved for
future extension and shall not be connected
externally.
1) Only applicable in TC1791ED. Reserved in TC1791PD.
2) Only available for SAK-TC1791S-512F240EP, SAK-TC1791F-512F240EP, SAK-TC1791F-512F240EL, SAK-
TC1791S-384F200EP, SAK-TC1791F-384F200EP, and SAK-TC1791F-384F200EL.
3) The MTSR output of SSCx is overlayed with the MRSTG input of the related SSCGx
4) Analog Input overlayed with a SENT Digitial Input. The related port logic is used configure the input as either
analog input (default after reset) or digital input. The related port logic supports only the port input features as
the connected pads are input pads only.
5) IOZ1 valid for this pin is the parameter with overlayed = No in the ADC parameter table.
6) IOZ1 valid for this pin is the parameter with overlayed = Yes in the ADC parameter table.
Data Sheet
65
V 1.1, 2014-05