SAK-XE167FM-72F80LAA Datasheet, PDF (16/144 Pages) Infineon Technologies AG – 16-Bit Single-Chip Real Time Signal Controller

XE167FM, XE167GM, XE167HM, XE167KM
XE166 Family / Base Line
General Device Information
Table 5
Pin Definitions and Functions (cont’d)
Pin Symbol
Ctrl. Type Function
5 P8.4
O0 / I St/B Bit 4 of Port 8, General Purpose Input/Output
CCU60_COU O1 St/B CCU60 Channel 1 Output
T61
CCU62_CC6 O2 St/B CCU62 Channel 1 Output
1
TMS_D
IH St/B JTAG Test Mode Selection Input
If JTAG pos. D is selected during start-up, an
internal pull-up device will hold this pin high when
nothing is driving it.
CCU62_CC6 I
1INB
St/B CCU62 Channel 1 Input
6 TRST
I
In/B Test-System Reset Input
For normal system operation, pin TRST should be
held low. A high level at this pin at the rising edge
of PORST activates the XE167xM’s debug
system. In this case, pin TRST must be driven low
once to reset the debug system.
An internal pull-down device will hold this pin low
when nothing is driving it.
7 P8.3
O0 / I St/B Bit 3 of Port 8, General Purpose Input/Output
CCU60_COU O1 St/B CCU60 Channel 0 Output
T60
CCU62_CC6 O2 St/B CCU62 Channel 0 Output
0
TDI_D
IH St/B JTAG Test Data Input
If JTAG pos. D is selected during start-up, an
internal pull-up device will hold this pin low when
nothing is driving it.
CCU62_CC6 I
0INB
St/B CCU62 Channel 0 Input
Data Sheet
16
V2.1, 2011-07