|
SAK-XE167FM-72F80LAA Datasheet, PDF (15/144 Pages) Infineon Technologies AG – 16-Bit Single-Chip Real Time Signal Controller | |||
|
◁ |
XE167FM, XE167GM, XE167HM, XE167KM
XE166 Family / Base Line
General Device Information
Key to Pin Definitions
⢠Ctrl.: The output signal for a port pin is selected by bit field PC in the associated
register Px_IOCRy. Output O0 is selected by setting the respective bit field PC to
1x00B, output O1 is selected by 1x01B, etc.
Output signal OH is controlled by hardware.
⢠Type: Indicates the pad type and its power supply domain (A, B, M, 1).
â St: Standard pad
â Sp: Special pad e.g. XTALx
â DP: Double pad - can be used as standard or high speed pad
â In: Input only pad
â PS: Power supply pad
Table 5
Pin Definitions and Functions
Pin Symbol
Ctrl. Type Function
3 TESTM
I
In/B Testmode Enable
Enables factory test modes, must be held HIGH for
normal operation (connect to VDDPB).
An internal pull-up device will hold this pin high
when nothing is driving it.
4 P7.2
O0 / I St/B Bit 2 of Port 7, General Purpose Input/Output
EMUX0
O1 St/B External Analog MUX Control Output 0 (ADC1)
TxDC4
O2 St/B CAN Node 4 Transmit Data Output
TxDC5
O3 St/B CAN Node 5 Transmit Data Output
CCU62_CCP I
OS0A
St/B CCU62 Position Input 0
TDI_C
IH St/B JTAG Test Data Input
If JTAG pos. C is selected during start-up, an
internal pull-up device will hold this pin high when
nothing is driving it.
Data Sheet
15
V2.1, 2011-07
|
▷ |