IC-MH16_15 Datasheet, PDF (4/25 Pages) IC-Haus GmbH – 12-BIT ANGULAR HALL ENCODER

iC-MH16
12-BIT ANGULAR HALL ENCODER
preliminary
Rev A1, Page 4/25
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 V()
Voltage at VDD, GND, A, B, Z, NA, NB,
NZ, U, V, W, MA, SLI, SLO
-6
6
V
G002 V(VZAP) Zapping voltage
-0.3
8
V
G003 V()
Voltage at NERR, NWARN, P0, P1, P2,
P3, PTE
-0.3
6
V
G004 I()
Current in VDD
-10
20
mA
G005 I()
Current in GND
-20
200
mA
G006 I()
Current in A, B, Z, NA, NB, NZ, SLO, U,
V, W
-100
100
mA
G007 I()
Current in MA, SLI, NERR, PTE
-10
10
mA
G008 Vd()
ESD Susceptibility at all pins
HBM, 100 pF discharged over 1.5 kΩ
2
kV
G009 Ts
Storage Temperature
-40
150
°C
G010 Tj
Junction Temperature
-40
150
°C
THERMAL DATA
Operating conditions: VPA, VPD = 5 V ±10 %
Item Symbol Parameter
No.
Conditions
Unit
Min. Typ. Max.
T01 Ta
T02 Rthja
Operating Ambient Temperature Range
-40
125 °C
Thermal Resistance Chip to Ambient surface mounted to PCB, thermal pad linked
40
K/W
to cooling area of approx. 2 cm²
All voltages are referenced to pin VNA1 unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.