IC-GD Datasheet, PDF (4/55 Pages) IC-Haus GmbH – UNIVERSAL I/O INTERFACE

iC-GD
UNIVERSAL I/O INTERFACE
preliminary
Rev A1, Page 4/55
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed.
Item Symbol Parameter
No.
Conditions
G001 VB
Power Supply at VB
Referenced to GNDP
G002 I(VB)
Current in VB
G003 VNB
Power Supply at VNB
Referenced to GNDP
G004 I(VNB) Current in VNB
G005 V(VDA) Voltage at VDA, IA1, IA2
Referenced to the lowest voltage at GNDP,
VDA, IA1, IA2;
Referenced to the highest voltage of VB, VDA,
IA1, IA2
G006 I(VDA) Current in VDA
G007 V()
Voltage at UP1, UP2, UI1, UI2
Referenced to the lowest voltage of GNDP,
VNB, UP1, UP2, UI1, UI2;
Referenced to the highest voltage of GNDP,
VB, UP1, UP2, UI1, UI2
G008 V()
Voltage at UN1, UN2
Referenced to GNDP
G009 V(VCC) Voltage at VCC
Referenced to GNDL
G010 I(VCC) Current in VCC
G011 I()
Current in IA1, IA2
G012 I()
Current in UP1, UP2, UI1, UI2, UN1,
UN2
G013 V(LED) Voltage at LED1, LED2
Referenced to GNDP
G014 I(LED) Current in LED1, LED2
G015 V()
Voltage at ADR2, ADR1, ADR0, SCL, Referenced to GNDL
SDA, NCS, SCLK, SDI, SDO, NIRQ,
NRES, RDY, SYNC1, SYNC2
G016 I()
Current in ADR2, ADR1, ADR0, NCS,
SCLK, SDI, NRES
G017 I()
Current in SCL, SDA
G018 I()
Current in IRQ, RDY, SYNC1, SYNC2
G019 I()
Current in SDO
G020 V()
Voltage at VPA, VPD, VREF, VRPH, Referenced to GNDP
TEST
G021 I()
Current in VPA, VPD, VREF, VRPH,
TEST
G022 V()
Voltage at RP, RN, GNDA
Referenced to GNDP
G023 I()
Current in RP, RN, GNDA, GNDL
G024 Vd()
ESD Susceptibility at all pins
HBM, 100 pF discharged through 1.5 kΩ
G025 Tj,op
Operating Junction Temperature
G026 Ts
Storage Temperature
Min.
-0.3
-10
-18
-10
-48
-100
-48
-48
-0.3
-50
-800
-50
-0.3
-30
-0.3
-4
-4
-25
-260
-0.3
-4
-0.3
-1
-40
-40
Unit
Max.
18
V
100
mA
0.3
V
100
mA
48
V
800
mA
48
V
48
V
7
V
20
mA
800
mA
50
mA
9
V
100
mA
7
V
4
mA
120
mA
220
mA
220
mA
7
V
4
mA
2
V
1
mA
2
kV
125
°C
125
°C
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.