GMS81004 Datasheet, PDF (81/101 Pages) Hynix Semiconductor – 8-BIT SINGLE CHIP MICROCOMPUTERS

Chapter6. Standby Function
<STOP MODE>
CLCOK
Release By Interrupt
RESET
STOP Mode
Stable
OSC. time
Program Setting Time by CKCTLR
Refer to Table 4-1
Longer than stable OSC. Time
Fig. 6.3 Release Timing of Standby Mode
6.3 RELEASE OPERATION OF STANDBY MODE
After Standby mode is released, the operation begins according to content of
related interrupt register just before Standby mode start(Fig. 6.3)
6.3.1 In Case of Interrupt Enable Flag(I) of PSW = 0
Release by only interrupt which interrupt enable flag = 1, and starts to execute from next
to Standby instruction (STOP).
6 -4