E1962B Datasheet, PDF (9/26 Pages) Agilent(Hewlett-Packard) – cdma2000/IS-95/AMPS Mobile Test Application

Forward SCH support: 1 SCH only
Forward SCH data rates:
RC3: 9.6, 19.2, 38.4, 76.8, or 153.6 kbps
RC4: 9.6, 19.2, 38.4, 76.8, or 153.6 kbps
Forward SCH data source: eight bit fixed pattern or PRBS
(default)
Forward SCH coding: convolutional or turbo
Reverse link access support: access channel for PREV=6
Reverse FCH data rate:
RC1: 1.2, 2.4, 4.8, 9.6 kbps
RC2: 1.8, 3.6, 7.2, 14.4 kbps
RC3: 1.5, 2.7, 4.8, 9.6 kbps
RC4: 1.8, 3.6, 7.2, 14.4 kbps
Reverse SCH support: SO32 assign for a single channel
Reverse SCH data rates:
RC3: 9.6, 19.2, 38.4, 76.8, or 153.6 kbps
Reverse link closed loop bit rate: fixed to 800 per second
Reverse link closed loop power control modes:
active
alternating – alternating 0 and 1 power bits
all up
all down
Reverse link closed loop power control transient: user start
function that interrupts the current reverse link closed loop
power control mode and substitutes the user-defined number
and direction of closed loop power control bits; once the
transient is sent, the closed loop power control reverts to the
original state
Reverse link closed loop power control transient modes: up,
down, and up-down-up
Transient number of steps: 1 to 400
Forward link power control support: test set ignores all power
control data sent by the mobile station
Real-time vocoder
Functionality: provides real-time encoding of external audio
applied to the front panel audio in port and real-time decoding
of audio output via the front panel audio out port
Real-time vocoder support: 13 k vocoder in service options 17
and 32768 and the EVRC vocoder in service option 3
Encoder data rate mode: auto, fixed, or limited; in auto mode the
vocoder algorithm selects the rate based on the sampled audio;
fixed mode locks the rate to the user selected rate; limited
allows the vocoder to use the user selected rate and any lower
rate, if available
Encoder data rate: full, half, quarter, or eighth
Expected input voltage: 0 to 2 V; sets the input gain for external
audio applied to the front panel audio in port
Max output voltage: 0 to 5 V; sets the output level of the decoded
audio routed to the front panel audio out port
Vocoder limitations: when active, no measurements are allowed
during real-time vocoding
Settable system time
Functionality: allows user to set the system time for the CDMA
system; system time is retained during power-off using the
internal real-time clock
CDMA system date: settable in the format of yyyy.mm.dd for the
year, month, and day
CDMA system time: settable in the format of hh.mm.ss for the
hour, minute, and seconds; input resolution is 2 seconds
Leap seconds: settable from 0 to 255 seconds
Local time offset: settable in the format of hh.mm from 00.00 to
15.30 in 30 minute increments
Daylight savings time indicator: on or off
MEID
MEID functionality: user on or off control
PLCM type: ESN based, BS assigned, or MEID
Query MEID: one button command that query’s the mobile station
for its MEID information
9