|
E1962B Datasheet, PDF (14/26 Pages) Agilent(Hewlett-Packard) – cdma2000/IS-95/AMPS Mobile Test Application | |||
|
◁ |
CDMA RF generator
Channels
Additive white Gaussian noise source: yes
AWGN bandwidth: typically 1.8 MHz < BW < 2.1 MHz
CDMA channels:
CDMA code channels (PREVâ¤6):
F-Pilot: fixed at Walsh code 0
F-Sync: fixed at Walsh code 32
F-Paging: fixed at Walsh code 1
F-QPCH (IS-2000 only): fixed at Walsh code 80
F-FCH: selectable Walsh code from the following set: 10, 14,
26, 30, 42, 46, 58, or 62
F-SCH (IS-2000 only): fixed to Walsh code 3
F-OCNS: selectable Walsh code from the following set: 5, 13,
21, 29, 37, 45, 53, and 61
CDMA PN offset: selectable from 0 to 511
Frequency
Frequency range:
⢠US cellular band (860.04-893.97 MHz, channels 1-799, 991-
1023, 1024-1323)
⢠Japan CDMA band (approx. 832-869.9875 MHz, channels 1-
799, 801-1039, 1041-1199, 1201-1600)
⢠US PCS band (1930-1990 MHz, channels 1-1199)
⢠Korean PCS band (1840-1870 MHz, channels 0-599)
⢠NMT-450 band (420-494 MHz, channels 1-300, 539-871, 1039-
1473, 1792-2016)
⢠IMT-2000 band (2110-2169.950 MHz, channels 0-1199)
⢠Secondary 800 MHz band (approx. 851-869 MHz, and 935-940
MHz, channels 0-719, 720-919)
⢠US PCS 1.9 GHz band (1930-1994.950 MHz, channels 0-1299)
⢠AWS band (2110-2154.950 MHz, channels 0-899)
⢠Cellular Upper 700 band (776-788 MHz, channels 0-240)
⢠400MHz European PAMR band (420-494MHz, channels 1-
2016)
⢠800MHz PAMR band (915-921MHz, channels 0-239)
⢠700MHz Public Safety band (757-769MHz, channels 0-240)
⢠Lower 700MHz band (728-746MHz, channels 0-360)
Frequency setting: by channel number or MHz (IS-2000 test mode
only)
Frequency setting resolution: typically 1 Hz
Amplitude
Output port control: user control of RF source routing to either the
RF IN/OUT port or the RF OUT ONLY port
RF IN/OUT composite signal level: sum of the user-set values of
the CDMA cell power and the AWGN source power
RF IN/OUT CDMA cell output level range (AWGN off):
â120 dBm/1.23 MHz to â13 dBm/1.23 MHz
RF IN/OUT AWGN output level range: â120 dBm/1.23 MHz to
â20 dBm/1.23 MHz, over-range available with reduced
performance to â15 dBm/1.23 MHz
RF IN/OUT CDMA cell absolute output level accuracy (AWGN
off): RF generator level accuracy is derived from 99th percentile
observations with 95 percent confidence (corresponds to an
expanded uncertainty with a 95 percent confidence (k=2)) at
ambient conditions, then qualified to include the environmental
effects of temperature and humidity.
< ±1.1 dB, â109 to â15 dBm/1.23 MHz
typically ±0.62 dB, â109 to â15 dBm/1.23 MHz
RF IN/OUT composite absolute output level accuracy (AWGN
on): < ±1.2 dB, â109 to â20 dBm/1.23 MHz,
typically ±0.7 dB, â109 to â20 dBm/1.23 MHz
RF IN/OUT reverse power: +37 dBm peak (5 W peak)
RF IN/OUT VSWR:
< 1.14:1, 400 to 1000 MHz
< 1.2:1, 1700 to 2000 MHz
< 1.32:1, 2010 to 2180 MHz
RF OUT ONLY composite signal level: sum of the user set values
of the CDMA cell power and the AWGN source power
RF OUT ONLY CDMA cell output level range (AWGN off):
â115 dBm/1.23 MHz to â5 dBm/1.23 MHz
RF OUT ONLY AWGN output level range: â115 dBm/1.23 MHz to
â12 dBm/1.23 MHz, over-range available with reduced
performance to â7 dBm/1.23 MHz
RF OUT ONLY CDMA cell absolute output level accuracy (AWGN
off):
< ±1.1 dB, â109 to â7 dBm/1.23 MHz,
typically < ±0.62 dB, â109 to â7 dBm/1.23 MHz
RF OUT ONLY compositel absolute output level accuracy
(AWGN on):
< ±1.2 dB, â109 to â12 dBm/1.23 MHz,
typically < ±0.7 dB, â109 to â12 dBm/1.23 MHz
RF OUT ONLY reverse power: +24 dBm peak (250 mW peak)
RF OUT ONLY VSWR: typically < 1.3:1 for 400 to 500 MHz, < 1.4:1
for 800 to 1000 MHz, and < 1.45:1 for 1.7 to 2.2 GHz
Isolation (from RF OUT ONLY port to RF IN/OUT when the RF
source is routed to the RF OUT ONLY port): typically > 40 dB
F-pilot relative level: â20 to 0 dB or off
F-sync relative level: â20 to 0 dB or off
F-paging relative level (PREVâ¤6): â20 to 0 dB or off
F-FCH channel relative level: settable from â30 to 0 dB with
0.01 dB resolution or off
F-SCH channel relative level: settable from â20 to 0 dB with
0.01 dB resolution or off
AWGN channel relative level range: settable to ±15 dB relative to
the user set CDMA cell power with 0.01 dB resolution
F-OCNS Walsh code length: fixed to 64 bits
F-OCNS relative level range: automatically calculated from other
code channel relative levels to provide the set CDMA cell
power (range of â30 to 0 dB or off)
Relative CDMA channel level accuracy: typically < ±0.2 dB
CDMA modulation
Modulation type: parallel BPSK for IS-95 channels and IS-2000
pilot, sync, and paging channels, and complex QPSK for the F-
FCH per IS-2000
Modulation quality:
IS-95, RC1, and RC2 residual rho: > 0.98, typically > 0.995
RC3, RC4, and RC5 residual rho (pilot only): > 0.98,
typically > 0.995
Residual EVM: < 10%, typically < 3.1%
Carrier feedthrough: typically < â25 dBc
14
|
▷ |