HMC701LP6CE Datasheet, PDF (46/46 Pages) Hittite Microwave Corporation – 8 GHz 16-Bit Fractional-N Synthesizer

v03.0709
HMC701LP6CE
8 GHz 16-Bit Fractional-N Synthesizer
Table 43. Reg 21h Temperature Sensor Read Only Register
Bit
Type
Name
Default
Description
6:0
RO
tsens_temperature
Current Temperature from temp sensor
lsb = 17.5°C
0
0000111 = Temp >= 82.5°C
0000110 = Temp
0000000 = Temp <=-22.5°C
tsens_temperature = floor ((Temp+40)/17.5)
Table 44. Reg 22h Autotune Result Register
Bit
Type
Name
Default
16:0
RO
vcot_cnt
0
Description
Contains the results of the autotune counter
Can be used to calculate the VCO frequency and
optimum VCO setting selected by the autotune
Outline Drawing
11
Package Information
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.25mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE
FOR SUGGESTED PCB LAND PATTERN.
Part Number
Package Body Material
Lead Finish
HMC701LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
MSL Rating
MSL1 ^[2]
Package Marking ^[1]
H701
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 47