English
Language : 

HMC701LP6CE Datasheet, PDF (11/46 Pages) Hittite Microwave Corporation – 8 GHz 16-Bit Fractional-N Synthesizer
v03.0709
HMC701LP6CE
8 GHz 16-Bit Fractional-N Synthesizer
11
General Purpose Output (GPO) Interface
The HMC701LP6CE features a 3-wire General Purpose Output (GPO) interface. GPO registers are described in
Reg1Bh Table 37. The GPO is a flexible interface that supports a number of different functions and real time waveform
access including:
a. General Data Output from SPI register gpo_sel_0_
data (gpo_sel=0)
f. Mirror of VCO Serial Port Data, Clock, Latch Enable
(gposel=5)
b. Prescaler & reference path outputs (gpo_sel=1)
g. Δ∑ Modulator Phase Accumulator (gposel=6)
c. Lock Detect Windows (gpo_sel=2)
h. Auxiliary oscillators (gposel=7)
d. Anti-cycle Slip waveforms (gpo_sel=3)
i. Auto Calibration Busy Flag (gposel=8)
e. Internal synchronized frac strobe with clocks
(gposel=4)
j. Multiple VCO Control, Latch Enables (gposel=9)
k. Δ∑ Modulator Outputs (gposel=10)
General Data to GPO (gpo_sel=0)
Setting register gpo_sel=0 in Table 37 assigns the 3-bit data from register gpo_sel_0_data Reg1B<6:4> to the GPO
bus.
Prescaler and Reference Path Outputs (gpo_sel = 1)
Setting register gpo_sel=1 (Reg1B<3:0> Table 37) results in the input crystal being buffered out to GPO3 as shown in
Figure 12. This is useful for example to generate a copy of the input crystal signal to drive other circuits in the application,
while at the same time isolating the noisy circuits from the sensitive crystal output. Often only the synthesizer requires
very low phase noise from the crystal, hence it is desirable to isolate other circuits from the crystal itself and allow the
synthesizer sole use of the low phase noise crystal.
gpo_sel=1 also routes the 200 MHz 14-bit reference path divider to GP02 and the 16-bit 7 GHz VCO path prescaler
output to GP01. This option allows the synthesizer to function as a stand alone fractional or integer prescaler and
provides visibility into the prescaler and reference path timing for sensitive applications.
Figure 12. gpo_01 Outputs
11 - 12
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com