MB86330 Datasheet, PDF (36/46 Pages) Fujitsu Component Limited. – 16-bit Fixed-point DSP

MB86330
s ELECTRICAL CHARACTERISTICS
1. Absolute Maximum Ratings
Parameter
Power supply voltage
Input voltage
Output voltage
Maximum output current
Storage temperature
Symbol Condition
VDD
VI
VO
IO
IO
Tstg
VDD – VSS
—
—
VO = VDD
VO = 0 V
—
Value
Min.
Max.
VSS – 0.5
4.0
VSS – 0.5 VDD + 0.5
VSS – 0.5 VDD + 0.5
—
14
—
–14
–65
+150
(VSS = 0 V)
Unit
Remarks
V
V Input pin
V
Output pin
BUS pin
mA _{Output drive pin}
mA ^{(IOL) 4 mA}
°C Ceramic package
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
2. Recommended Operating Conditions
Parameter
Power supply voltage
“H” level input voltage
“L” level output voltage
Ambient temperature
Symbol
VDD
VIH
VIL
TA
Min.
3.0
0.65 VDD
VSS
0
Value
Typ.
3.3
—
—
—
Max.
3.6
VDD + 0.3
0.25 VDD
+40
Unit
V
V
V
°C
(VSS = 0 V)
Remarks
VDD
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device's electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
36