MC9S12H256VFVE Datasheet, PDF (96/130 Pages) Freescale Semiconductor, Inc – Original Release Date: 29 SEP 2000 Revised: 28 JUL 2008

MC9S12H256 Device User Guide — V01.20
Table A-6 5V I/O Characteristics
Conditions are shown in Table A-4 unless otherwise noted
Num C
Rating
1 P Input High Voltage
2 P Input Low Voltage
3 C Input Hysteresis
Input Leakage Current except PU, PV, PW (pins in
4 P high impedance input mode)¹
V_in = V_DD5 or V_SS5
Input Leakage Current PU, PV, PW (pins in high
5 P impedance input mode)²
V_in = V_DD5 or V_SS5
Output High Voltage (pins in output mode, except PU,
PV and PW)
6 P _{Partial Drive IOH = –1.0mA}
Full Drive IOH = –10mA
Output Low Voltage (pins in output mode except PU,
PV and PW)
7 P _{Partial Drive IOL = +1.0mA}
Full Drive IOL = +10mA
Output High Voltage (pins PU, PV and PW in output
8 P _{mode) IOH = –20mA}
Output Low Voltage (pins PU, PV and PW in output
9 P _{mode) IOL = +20mA}
Output Rise Time (pins PU, PV and PW in output
mode with slew control enabled) V_DD5=5V,
10 P R_load=1KΩ, 10% to 90% of V_OH
-40°C, EPP package
25°C, 140°C
Output Fall Time (pins PU, PV and PW in output
mode with slew control enabled) V_DD5=5V,
11 P R_load=1KΩ, 10% to 90% of V_OH
-40°C, EPP package
25°C, 140°C
Internal Pull Up Device Current,
12 P _{tested at VIL Max.}
Internal Pull Up Device Current,
13 P _{tested at VIH Min.}
Internal Pull Down Device Current,
14 P _{tested at VIH Min.}
Internal Pull Down Device Current,
15 P _{tested at VIL Max.}
Symbol
V_IH
V_IL
V
HYS
Min
0.65*V_DD5
V_SS5 – 0.3
I_in
–1.0
Typ
–
–
250
–
Max
V_DD5 + 0.3
0.35*V_DD5
1.0
I_in
–2.5
–
2.5
V_OH
V_DD5 – 0.8
–
–
V_OL
–
–
0.8
V_OH
V_DD5 – 0.32 V_DD5 – 0.2
V_OL
–
.2
–
0.32
t_r
60
120³
180³
60
100
130
t_f
60
120³
180³
60
100
130
I_PUL
–
–
–130
I_PUH
–10
–
–
I_PDH
–
–
130
I_PDL
10
–
–
Unit
V
V
mV
µA
µA
V
V
V
V
ns
ns
µA
µA
µA
µA
96