33910 Datasheet, PDF (5/44 Pages) Freescale Semiconductor, Inc – LIN System Basis Chip with 2x60mA High Side Drivers

ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground, unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
ELECTRICAL RATINGS
Supply Voltage at VS1 and VS2
Normal Operation (DC)
Transient Conditions (load dump)
V
V_SUP(SS)
-0.3 to 27
V_SUP(PK)
-0.3 to 40
Supply Voltage at VDD
Input / Output Pins Voltage⁽⁶⁾
CS, RST, SCLK, PWMIN, ADOUT0, MOSI, MISO, TXD, RXD
V_DD
-0.3 to 5.5
V
V
V_IN
-0.3 to V_DD+0.3
Interrupt Pin (IRQ)⁽⁷⁾
V_IN(IRQ)
-0.3 to 11
HS1 Pin Voltage (DC)
V_HS1
- 0.3 to V_SUP+0.3
V
HS2 Pin Voltage (DC)
V_HS2
- 0.3 to V_SUP+0.3
V
L1 Pin Voltage
V
Normal Operation with a series 33kΩ resistor (DC)
V_L1DC
-18 to 40
Transient input voltage with external component (according to ISO7637-2)
V_L1TR
±100
(See Figure 5, page 16)
VSENSE Pin Voltage (DC)
V_VSENSE
-27 to 40
V
LIN Pin Voltage
V
Normal Operation (DC)
V_BUSDC
-18 to 40
Transient input voltage with external component (according to ISO7637-2)
(See Figure 4, page 16)
V_BUSTR
-150 to 100
VDD output current
ESD Voltage⁽⁸⁾
Human Body Model - LIN Pin
Human Body Model - all other Pins
Machine Model
Charge Device Model
Corner Pins (Pins 1, 8, 9, 16, 17, 24, 25 and 32)
All other Pins (Pins 2-7, 10-15, 18-23, 26-31)
NC Pin Voltage (NC pins 11, 15, 16, 17, 19, 20, 21, 22, and 28)⁽⁹⁾
I_VDD
Internally Limited
A
V
V_ESD1-1
± 8000
V_ESD1-2
±2000
V_ESD2
± 200
V_ESD3-1
V_ESD3-2
V_NC
± 750
± 500
Note 9
Notes
6. Exceeding voltage limits on specified pins may cause a malfunction or permanent damage to the device.
7. Extended voltage range for programming purpose only.
8. Testing is performed in accordance with the Human Body Model (C_ZAP = 100 pF, R_ZAP = 1500 Ω), the Machine Model (C_ZAP = 200 pF,
R_ZAP = 0Ω), and the Charge Device Model, Robotic (C_ZAP = 4.0pF).
9. Special configuration recommended / mandatory for marked NC pins. Please refer to the typical application shown on page 40.
Analog Integrated Circuit Device Data
Freescale Semiconductor
33910
5