MC68HC05C9E Datasheet, PDF (16/106 Pages) Freescale Semiconductor, Inc – Microcontrollers

General Description
1.5.5 TCAP
This pin controls the input capture feature for the on-chip programmable timer. The TCAP pin contains an
internal Schmitt trigger as part of its input to improve noise immunity. Refer to Chapter 8
Capture/Compare Timer for more detail.
1.5.6 TCMP
The TCMP pin provides an output for the output compare feature of the on-chip programmable timer.
Refer to Chapter 8 Capture/Compare Timer for more detail.
1.5.7 PA0–PA7
These eight I/O lines comprise port A. The state of each pin is software programmable and all port A pins
are configured as inputs during reset. Refer to Chapter 7 Input/Output Ports for more detail.
1.5.8 PB0–PB7
These eight I/O lines comprise port B. The state of each pin is software programmable and all port B pins
are configured as inputs during reset. Port B has mask option register enabled pullup devices and
interrupt capability selectable for any pin. Refer to Chapter 7 Input/Output Ports for more detail.
1.5.9 PC0–PC7
These eight I/O lines comprise port C. The state of each pin is software programmable and all port C
pins are configured as inputs during reset. PC7 has high current sink and source capability. Refer to
Chapter 7 Input/Output Ports for more detail.
1.5.10 PD0–PD5 and PD7
These seven I/O lines comprise port D. The state of each pin is software programmable and all port D
pins are configured as inputs during reset. Refer to Chapter 7 Input/Output Ports for more detail.
MC68HC05C9E Advance Information Data Sheet, Rev. 0.1
16
Freescale Semiconductor