RFM95 Datasheet, PDF (89/121 Pages) List of Unclassifed Manufacturers – Low Power Long Range Transceiver Module

WIRELESS & SENSING
RFM95/96/97/98(W)
PRELIMINARY
DATASHEET
Name
(Address)
Bits
7-6
5
RegOcp
(0x0B)
4-0
7-5
RegLna
(0x0C)
4-3
2
1-0
Variable Name
unused
OcpOn
OcpTrim
LnaGain
LnaBoostLf
reserved
LnaBoostHf
Mode
Default
value
FSK/OOK Description
r 0x00 unused
Enables overload current protection (OCP) for the PA:
rw 0x01 0 Æ OCP disabled
1 Æ OCP enabled
Trimming of OCP current:
I_max = 45+5*OcpTrim [mA] if OcpTrim <= 15 (120 mA) /
rw
0x0b
I_max = -30+10*OcpTrim [mA] if 15 < OcpTrim <= 27 (130 to 240
mA)
I_max = 240mA for higher settings
Default I_max = 100mA
Registers for the Receiver
LNA gain setting:
000 Æ reserved
001 Æ G1 = highest gain
010 Æ G2 = highest gain – 6 dB
011 Æ G3 = highest gain – 12 dB
100 Æ G4 = highest gain – 24 dB
rw 0x01 101 Æ G5 = highest gain – 36 dB
110 Æ G6 = highest gain – 48 dB
111 Æ reserved
Note:
Reading this address always returns the current LNA gain (which
may be different from what had been previously selected if AGC
is enabled.
Low Frequency (RFI_LF) LNA current adjustment
rw 0x00 00 Æ Default LNA current
Other Æ Reserved
rw 0x00 reserved
High Frequency (RFI_HF) LNA current adjustment
rw 0x00 00 Æ Default LNA current
11 Æ Boost on, 150% LNA current
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com
Page 89