RFM95 Datasheet, PDF (110/121 Pages) List of Unclassifed Manufacturers – Low Power Long Range Transceiver Module

WIRELESS & SENSING
RFM95/96/97/98(W)
PRELIMINARY
DATASHEET
7.3.1.1. Timing Diagram
When no signal is received, the circuit wakes every Timer1 + Timer2 and switches to Receive mode for a time defined by
Timer2, as shown on the following diagram. If no Preamble is detected, it then switches back to Idle mode, i.e. Sleep mode
with RC oscillator on.
No received signal
Receive
Idle ( Sleep + RC )
Receive
Idle
Timer1
Timer2
Timer1
Timer2
Timer1
Figure 45. Listen Mode with No Preamble Received
If a Preamble signal is detected, the Sequencer is switched off. The PreambleDetect signal can be mapped to DIO4, in
order to request the user's attention. The user can then take appropriate action.
Received signal
Preamble ( As long as T1 + 2 * T2 )
Sync
Word
Payload
Crc
Idle ( Sleep + RC )
Timer1
Timer2
Timer2
Receive
Preamble
Detect
Figure 46. Listen Mode with Preamble Received
Page 110
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com