AP9319 Datasheet, PDF (22/30 Pages) List of Unclassifed Manufacturers – Environmental Monitoring Unit

How to Access a Configured Unit
SNMP
Telnet for basic access. Telnet provides the basic security of
authentication by user name and password, but not the high-security
benefits of encryption. To use Telnet to access an Environmental
Monitoring Unit’s control console from any computer on the same
subnet:
1. At a command prompt, use the following command line, and press
ENTER:
telnet address
As address, use the Environmental Monitoring Unit’s IP address
or DNS name (if configured).
2. Enter the user name and password (by default, apc and apc for an
Administrator, or device and apc for a Device Manager).
SSH for high-security access. If you use the high security of SSL for
the Web interface, use Secure SHell (SSH) for access to the control
console. SSH encrypts user names, passwords, and transmitted data.
The interface, user accounts, and user access rights are the same whether
you access the control console through SSH or Telnet, but to use SSH,
you must first configure SSH and have an SSH client program installed
on your computer.
See the User’s Guide for more information on configuring
and using SSH.
See also
After you add the PowerNet MIB to a standard SNMP MIB browser,
you can use that browser for SNMP access to the Environmental
Monitoring Unit. The default read community name is public; the
default read/write community name is private.
If you enable SSL and SSH for their high-security
authentication and encryption, disable SNMP. Allowing
Note ^{SNMP access to the Environmental Monitoring Unit}
compromises the high security you implement by choosing
SSL and SSH. To disable SNMP, you must be an
Administrator; use the SNMP option of the Network menu.
FTP and SCP
You can use FTP (enabled by default) or Secure CoPy (SCP) to transfer
new firmware to the Environmental Monitoring Unit, or to access a copy
of the Environmental Monitoring Unit’s event logs. SCP provides the
higher security of encrypted data transmission and is enabled
automatically when you enable SSH.
18
Environmental Monitoring Unit — Installation and Quick Start