AP9319 Datasheet, PDF (13/30 Pages) List of Unclassifed Manufacturers – Environmental Monitoring Unit

Accessories
Temperature and
humidity probe
The temperature and humidity probe (AP9512THBLK) monitors the
room temperature and humidity.
To install the probe:
1. Determine a location that will allow you to route and
secure the 12-foot cord neatly.
.
Avoid locating the probe in an area that could
give an inaccurate reading, such as near air
Note ^{ducts, other heat sources, windows, direct}
sunlight, or room entrances.
2. Attach the probe to a wall or other surface with the
provided hook-and-loop fasteners.
3. Neatly route and secure the 12-foot cord with
tie-wraps or cable clips.
4. Plug the probe connector into the port marked Probe 1 on the rear
panel of the unit.
Additional Temperature and Temperature/Humidity probes
may be purchased, including:
Note
• Temperature Probe (AP9512TBLK)
• Temperature/Humidity Probe (AP9512THBLK)
• Temperature Probe with Digital Display (A-Link)
(AP9520T)
• Temperature/Humidity Probe with Digital Display
(A-Link) (AP9520TH)
Environmental Monitoring Unit — Installation and Quick Start
9