SLFLD25-128J Datasheet, PDF (20/21 Pages) List of Unclassifed Manufacturers – 128 MB to 8 GB 2.5-Inch IDE Flash Drives

SLFLD25-xxxJ(I)
IDE FLASH DRIVE
Write Sector(s)
(code: 30h or 31h)
This command writes from 1 to 256 sectors as specified in the
Sector Count register. A sector count of zero requests 256
sectors. The transfer begins at the sector specified in the
Sector Number register.
Write Verify
(code: 3Ch)
This command is similar to the Write Sector(s) command
except each sector is verified immediately after being written.
Write Sector(s) without Erase
(code: 38h)
This command is similar to the Write Sector(s) command
with the exception that an implied erase before the write
operation is not performed. Note that before using this
command, it is required to erase the repective sectors using
the Erase Sectors command.
Document Part Number 61000-02817-109 March 2005 Page 20