SLFLD25-128J Datasheet, PDF (1/21 Pages) List of Unclassifed Manufacturers – 128 MB to 8 GB 2.5-Inch IDE Flash Drives

SLFLD25-xxxJ(I)
128 MB to 8 GB 2.5-Inch IDE Flash Drives
FEATURES
• Capacities from 128MB to 8GB
• Standard IDE Drive Form Factor of 2.5-Inch
• Standard IDE connector and Interface
• Configures to Master or Slave IDE device
• Endurance Guarantee of 2,000,000 Write/Erase Cycles
• Replaces IDE hard drive for applications where tough
environments prohibit use of traditional rotating media
• Solid-State (no moving parts)
• High Shock and Vibration Limits
• 512 Byte Sector and ECC Defect Management Compatible
to IDE Hard Disk Drives
• No “Spin” Noise Compared to Traditional Rotating Media
• Available in Commercial and Industrial Operating
Temperature Ranges
• Standard ECC Engine
• 7 Year Warranty
GENERAL DESCRIPTION
The SimpleTech SLFLD25-xxxJ(I) are solid-state flash IDE
drives with capacities of 128MB to 8GB and in a standard 2.5-
inch form factor. The IDE drive consists of an IDE controller
and an array of flash memory devices. The IDE drive
supports the standard ATA register and command set.
SimpleTech OEM flash drives are the product of choice in
applications requiring high reliability and high tolerance to
shock, vibration, humidity, altitude, and temperature.
Because there are no moving parts to service or maintain,
flash drives are reliable alternatives to mechanical hard disk
drives for high availability and mission critical applications.
While the inherent ruggedness and reliability of solid state
storage relative to rotating hard drives is intuitive, new
applications for OEM flash drives are emerging due to the
low cost per usable megabyte. Most applications using
embedded operating systems such as VxWorks™, Windows
XP/embedded™, and Linux™ don’t have multi-gigabyte
data storage requirements, and therefore a cost savings can
be realized when using this robust media.
ORDERING INFORMATION
IDE Flash Drives
Part Number*
Capacity
• SLFLD25-128J(I) ................................................... 128 MBytes
• SLFLD25-256J(I) ................................................... 256 MBytes
• SLFLD25-512J(I) ................................................... 512 MBytes
• SLFLD25-1GBJ(I) ...................................................... 1 GBytes
• SLFLD25-2GBJ(I) ...................................................... 2 GBytes
• SLFLD25-3GBJ(I) ...................................................... 3 GBytes
• SLFLD25-4GBJ(I) ...................................................... 4 GBytes
• SLFLD25-5GBJ(I) ...................................................... 5 GBytes
• SLFLD25-6GBJ(I) ...................................................... 6 GBytes
• SLFLD25-7GBJ(I) ...................................................... 7 GBytes
• SLFLD25-8GBJ(I) ...................................................... 8 GBytes
* Custom capacities available.
An “I” suffix added to the part number selects the
Industrial Operating Temperature range option. A part
number without the “I” suffix selects the Commercial
Operating Temperature range option.
Web: www.simpletech.com
Document Part Number 61000-02817-109 March 2005 Page 1