SLFLD25-128J Datasheet, PDF (2/21 Pages) List of Unclassifed Manufacturers – 128 MB to 8 GB 2.5-Inch IDE Flash Drives

SLFLD25-xxxJ(I)
PACKAGE DIMENSIONS
Refer to the figure below for package dimensions of the 2.5-
inch FlashDrive. The units are inches (in parenthesis,
millimeters), and the tolerences are ±0.005 inches (1.27mm)
unless otherwise specified.
IDE FLASH DRIVE
0.236[5.99]
0.118[3.00]
(16X) M3 (3mm)
Threaded Hole
See Detail A.
2.750[69.85]
2.430[61.72]
0.160 [4.06]
0.551 [14.00]
3.016 [76.61]
1.375 [34.93] 1.500 [38.10]
3.945 [100.20]
0.0787 [2.00]
Pin 1
0.157 [3.99]
0.0787 [2.00]
Pin 20 removed
0.399 [10.14]
Detail A
Screw length
from outside edge
of drive to end of
screw must be within
these parameters:
0.085-0.175
[2.16-4.45]
Document Part Number 61000-02817-109 March 2005 Page 2