EVAL-BF5XX Datasheet, PDF (8/35 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

1 Introduction
NOTE: The DEV-BF5xxDA-Lite has an on-board Debug Agent, which is not available on the EVAL-BF5xx Board. All
other features are identical! In this document, when describing both boards, the name DEV-BF5xx-Lite is used.
The DEV-BF5xx-Lite Board is a lightweight development platform for all current and future Bluetechnix Core
Modules (CM-BF527, CM-BF533, CM-BF561, CM-BF537U, CM-BF537E, TCM-BF537, TCM-BF518). On the DEV-
BF5xxDA-Lite board a bottom mounted tiny high performance Debug Agent fully compatible with Visual DSP++
allows programming and debugging any of the Blackfin Processors. The small baseboard has all hardware necessary
to test the performance of the Core Modules including a high-speed serial port directly connectable to a computer
USB port, a CAN Interface and an SD-Card mass storage device socket.
1.1 Overview
The DEV-BF5xx-Lite Board includes the following components:
60 Pin Expansion Connector 2
USB to
UART
DEBUG
AGENT
SD-Card
CAN
Coremodules:
CM-BF533
CM-BF537E
CM-BF537U
CM-BF561
TCM-BF537
CM-BF527
TCM-BF518
DC/DC
Power Supply
(5V and 3V3)
USB-OTG
(for CM-BF537U,
CM-BF527)
RJ-45
(for CM-BF537E,
CM-BF527)
60 Pin Expansion Connector 1
Figure 1-1: Overview of the Dev-BF5xx-Lite Board
 DC/DC Converters
o 5V@2A + 3V3@1.5A (draws its power from the 5V output of the DC/DC)
 1 Core Module Slot
o Supports all current Bluetechnix Blackfin based Core Modules
DEV-BF5xxDA-lite V5.x Hardware User Manual
7