EVAL-BF5XX Datasheet, PDF (31/35 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

Now the session is ready and VDSP++ should start with these settings. The Core Module on the DEV-BF5xxDA-Lite is
now ready for debugging.
For further information about the session wizard and the VDSP++ tools please refer to the VDSP++ manuals
downloadable from the Analog Devices website.
If you change your Core Module on the DEV-BF5xxDA-Lite you have to reconfigure VDSP++ starting with the install
tool as described above.
9 Using the VDSP Flash Programming Tool
9.1 Developing an Application
If you are developing your own projects with the VDSP++ development tools, including the JTAG provided by
Analog Devices you can use the flash programming tool included in the VDSP++ environment in order to flash your
program on the Core Module. You have to load the flash driver located on your EVAL board support CD
corresponding to the inserted Core Module.
9.2 Overwriting BLACKSheep Code
If you overwrite intentionally or unintentionally the section in the flash containing the BLACKSheep code, you will
need a JTAG device and the VDSP++ flash tool to reprogram the flash. Flashing the appropriate BLACKSheep
loader file (*.ldr) located on the CD, reinstalls the BLACKSheep code.
The examples, drivers and the BLACKSheep software are under permanent
development. Please refer to the download section of www.bluetechnix.com
to get the latest versions or updates.
10 Extender Board Compatibility List
This chapter points out the compatibility of the EVAL-BF5xx and DEV-BF5xxDA-Lite with Core Module and Extension
Boards. Please refer to the Extender board and Core Module Hardware Manuals for further information.
Legend:
OK
(OK)
NO
NG
NT
Limited
Full functional
Functional but not all features are available
Not functional
Functionality not guaranteed
Not tested yet
Limited
In the following tables show possible Board combinations:
DEV-BF5xxDA-lite V5.x Hardware User Manual
30