EVAL-BF5XX Datasheet, PDF (27/35 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

6. Open a Terminal program like the HyperTerminal included in Windows operating systems and open the
respective COM port with 115200 Baud, 8 Data-bits, No Parity and 1 Stop bit, disable the Hardware
flow control.
7. Reset the DEV-BF5xxDA-Lite Board (Press the main reset button). After this you will see the BLACKSheep
boot-screen showing up. If you disconnect the device, you have to reconnect.
This shows a sample boot screen. Depending on the current software version, you might get different boot
messages.
8. You can find a simple hello world program on your support CD or at the download section of the product
homepage. To start the sample program, type “xmr UART” on your terminal program, then (Transfer 
Send file) select the appropriate file “UART.ldr” depending on your Core Module, choose protocol “Xmodem”
and send. After the download has finished type “exec UART” to execute the sample program.
9. Press reset to return to the BLACKSheep command line.
8.2 Debug Agent Setup (Only for DEV-BF5xxDA-Lite)
If you have purchased a DEV-BF5xxDA-Lite board with the Debug Agent mounted on the bottom side of the board
you can use it to download and debug your software with the VDSP++ development environment from Analog
Devices. An evaluation version is included in the support CD or you can download it from our website or the
website from Analog Devices. Currently the Debug Agent works only with version 4.5 of the VDSP++ IDE.
Note: The Core Module will get warm while in use.
Please follow the instructions for installing and configuring VDSP++ to work with the Debug Agent.
1. Install VDSP++4.5
DEV-BF5xxDA-lite V5.x Hardware User Manual
26