|
EVAL-BF5XX Datasheet, PDF (25/35 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH | |||
|
◁ |
1. Make sure the Jumper JP1 and JP2 are set and the switch S4 is in position 0 as shown in Figure 8-1 .
Figure 8-1: Setup of the DEV-BF5xxDA-Lite Board
2. Set switch S2 according chapter 5.2 and 6. Set switch S1 according chapter 5.1.
3. Connect the power supply to the power connector of the DEV-BF5xxDA-Lite board.
4. Connect the DEV-BF5xxDA-Lite Board via USB to the PC. The pre-flashed BLACKSheep starts and the LED
mounted on the EVAL board starts blinking. On the PC usually the âFound New Hardware Wizardâ opens.
If the wizard asks connect to the windows update site, select âNo, not this timeâ
DEV-BF5xxDA-lite V5.x Hardware User Manual
24
|
▷ |