EVAL-BF5XX Datasheet, PDF (23/35 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

BMODE0,BMODE1
On
0
Off
12345678
On
1
Off
12345678
On
2
Off
12345678
On
3
Off
12345678
Execute from16Bit ext. mem. Bypass ROM
(Standard boot mode for uBoot, uClinux)
Boot from 8Bit or 16Bit EEPROM/Flash
(Standard boot mode for BLACKSheep)
Boot from SPI 8Bit
Boot from SPI 16Bit
Table 6-2: Boot Mode CM-BF533
Boot-settings for CM-BF537E, CM-BF537U and TCM-BF537 (S2) only Switches 1 – 3 are shown
Switch Settings
BMODE0,BMODE1,BMODE2
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
Boot Mode Description
0
Execute from16Bit ext. mem. Bypass ROM
(Standard boot mode for uBoot, uClinux)
1
Boot from 8Bit or 16Bit EEPROM/Flash
(Standard boot mode for BLACKSheep)
2
Reserved
3
Boot from serial SPI Memory
4
Boot from SPI Host (slave mode)
5
Boot from serial TWI memory
6
Boot from TWI host (slave mode)
7
Boot from UART0 host (slave mode)
Table 6-3: Boot Mode CM-BF537 Types
Boot-settings for CM-BF561 (S2) only Switches 1 – 3 are shown
Attention: Switch 4-8 are not used for boot mode settings. Please refer to section 7 to see the settings for
switch 4-8.
If you are using a CM-BF561 set switches 1-3 of S2 to OFF!
DEV-BF5xxDA-lite V5.x Hardware User Manual
22