EVAL-BF5XX Datasheet, PDF (22/35 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

V3
Green
100MB Speed LED
Table 5-6: Ethernet LEDs
5.11 LEDs of the Debug Agent
Designator
V5
V6
V7
V8
Color
Green
Green
Green
Green
Function
Flag0
Flag1
Monitor
Pr. done
Table 5-7: LEDs for the Debug Agent
6 Boot Mode Description
Only switch 1-3 of S2 are described in this section. Please refer to section 5.2 to see the settings for switch 4-8.
Boot-settings for CM-BF527 (S2) only Switches 1 – 3 are shown
Switch 4 is not used for boot mode settings, so the Boot Modes 8-15 of the CM-BF527 cannot be used. For
details of boot mode 8-15 see the datasheet of the processor.
Switch Settings
BMODE0,BMODE1,BMODE2
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
On
Off
12345678
Boot Mode Description
0
Idle – No boot
1
Boot from 8Bit or 16Bit EEPROM/Flash
(Standard boot mode for BLACKSheep, uBoot and
uClinux)
2
Boot from 16-bit asynchronous FIFO.
3
Boot from serial SPI Memory
4
Boot from SPI Host (slave mode)
5
Boot from serial TWI memory
6
Boot from TWI host (slave mode)
7
Boot from UART0 host (slave mode)
Table 6-1: Boot Mode CM-BF527 Type
Boot-settings for CM-BF533 (S2) only Switches 1 – 3 are shown
Switch Settings
Boot Mode Description
DEV-BF5xxDA-lite V5.x Hardware User Manual
21