EVAL-BF5XX Datasheet, PDF (15/35 Pages) List of Unclassifed Manufacturers – Bluetechnix Mechatronische Systeme GmbH

4.6 X7, X8 Expansion Connectors
The Expansion Connectors on the Dev-BF5xxDA-Lite for a stacked height of 16mm are of the following type:
Part
X7, X8
Manufacturer
AMP (Stacked Height = 16mm)
Table 4-4: DEV-board connector types
Manufacturer Part Nr.
5-5179010-2
The matching connector, which is used for building an extender board, can be ordered from Bluetechnix.
Part
Matching connector
Manufacturer
AMP
Manufacturer Part Nr.
5179031-2
Table 4-5: DEV-board matching connector types
4.7 X10 – CAN Connector
Pin No.
1
2
Signal (Core Module)
CAN+
CAN-
Signal Type
I/O
I/O
Table 4-6: CAN Connector
4.8 X11 – Power Connector
The board is shipped with a 12V, 2A external DC/DC Power Supply which should be used.
Pin No.
1
2
3
Signal
Vin (+6V to +16V DC) Input Supply
NC
GND
Description
Preferable 12V DC (1-2A)
Table 4-7: Power Supply
Vin
GND
Figure 4-1: Power connector
To connect to X11 use a “DCPP1 e.g. from Cliff Electronic Components” (∅2.1mm * ∅5.5mm * 9.5mm) plug to the
power supply. Outer contact is GND, inner contact is Vin.
DEV-BF5xxDA-lite V5.x Hardware User Manual
14