MB8117800A-60 Datasheet, PDF (7/27 Pages) List of Unclassifed Manufacturers – 2 M X 8 BIT FAST PAGE MODE DYNAMIC RAM

To Top / Lineup / Index
MB8117800A-60/-70
s ABSOLUTE MAXIMUM RATINGS (See WARNING)
Parameter
Voltage at any pin relative to VSS
Voltage of VCC supply relative to VSS
Power Dissipation
Short Circuit Output Current
Operating Temperature
Storage Temperature
Symbol
VIN, VOUT
VCC
PD
—
TOPE
TSTG
Value
Unit
–0.5 to +7.0
V
–0.5 to +7.0
V
1.0
W
50
mA
0 to 70
°C
–55 to +125
°C
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Notes Symbol Min.
Typ.
Max. Unit
Supply Voltage
VCC
4.5
5.0
5.5
*1
V
VSS
0
0
0
Input High Voltage, all inputs *1
VIH
2.4
—
6.5
V
Input Low Voltage, all inputs* *1
VIL
–3.0
—
0.8
V
* : Undershoots of up to –2.0 volts with a pulse width not exceeding 20 ns are acceptable.
Ambient
Operating Temp
0°C to + 70°C
WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All
the device’s electrical characteristics are warranted when operated within these ranges.
Always use semiconductor devices within the recommended operating conditions. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representative beforehand.
s CAPACITANCE
Parameter
Input Capacitance, A0 to A10
Input Capacitance, RAS, CAS, WE, OE
Input/Output Capacitance, DQ1 to DQ8
Symbol
CIN1
CIN2
CDQ
Max.
5
5
7
(TA = 25°C, f = 1 MHz)
Unit
pF
pF
pF
7