82C931 Datasheet, PDF (53/64 Pages) List of Unclassifed Manufacturers – Plug and Play Integrated Audio Controller

82C931
6.0 Electrical Specifications
Stresses above those listed in the following tables may cause permanent damage to the device. These are stress ratings only
and functional operation of the device at these or any other conditions above those indicated in the operational sections of this
specification are not implied.
6.1 Absolute Maximum Ratings
Symbol Parameter
Min
Max
Unit
VCC
Supply Voltage
4.5
5.5
V
AVCC Analog Supply Voltage
4.75
5.25
V
VIN
Input Voltage
–0.5
VCC + 0.5
V
VOUT Output Voltage
–0.5
VCC + 0.5
V
TOP
Operating Temperature
0
70
°C
TSTG
Storage Temperature
–40
125
°C
ESD^*
ESD Tolerance (Human Body
Model MIL883C, 3015.7, Notice 8)
1000
V
* ESD senstive device. Electrostatic charges as high as 4000V readily accumulate on the human body and test
equipment and can discharge without detection. Although the 82C931 features ESD protection circuitry, perma-
nent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD pre-
cautions are recommended to avoid performance degradation or loss of functionality.
6.2 DC Characteristics: 5.0 Volt (VCC = 5.0V ±5%, TA = 0°C to +70°C)
Symbol Parameter
Min
Max
Unit
VIL
Low Level Input Voltage
–0.3
0.8
V
VIH
High Level Input Voltage
2.4
VCC + 0.3
V
VIHa
High Level Input Voltage for RESET
3.5
VCC + 0.3
V
VOL
Low Level Output Voltage
0.2
V
VOH
High Level Output Voltage
VCC – 0.5
5.5
V
IIL
Input Leakage Current
10
µA
IILa
Input Leakage Current with 5K
ohm Pull-up Resistor
–100
–500
µA
IILb
Input Leakage Current with 50K
–10
–50
µA
ohm Pull-up Resistor
IOL
Output Leakage Current
10
µA
IPD
Static or Power-down Mode Current
300
µA
Condition
VCC = 5.5V
VCC = 4.5V
VCC = 4.5V
IOL = 4mA, VCC = 4.5
IOH = –4mA VCC = 5.5V
VCC = 5.5V
VIN = 0V
VIN = 0V
VCC = 5.5V
VCC = 5.5V
912-3000-035
Revision: 2.1
OPTi
®
Page 45