SED1520D0A Datasheet, PDF (31/52 Pages) List of Unclassifed Manufacturers – DOT MATRIX LCD DRIVER

5.0 Electrical Characteristics
5.0 – 5.1
5.0 ELECTRICAL CHARACTERISTICS
5.1 ABSOLUTE MAXIMUM RATINGS
Parameter
Supply voltage (1)
Supply voltage (2)
Supply voltage (3)
Input voltage
Output voltage
Allowable loss
Operating temperature
Storage temperature
Soldering temperature/time
Symbol
VSS
V5
V1, V4
V2, V3
VIN
VO
PD
TOPR
TSTG
TSOLDER
Standard
–8.0 ~ +0.3
–16.5 ~ +0.3
V5 ~ +0.3
VSS – 0.3 ~ +0.3
VSS – 0.3 ~ +0.3
250
–30 ~ +85
–65 ~ +150
260/10 (at leads)
Unit
V
V
V
V
V
mW
°C
°C
°C/Sec
Notes:
1. All voltages are based on VDD = 0V.
2. The following condition must always hold true with voltages V1, V2, V3, V4 and V5:
VDD ≥ V1 ≥ V2 ≥ V3 ≥ V4 ≥ V5
3. The LSI may be permanently damaged if used with any value in excess of the absolute maximum ratings. During normal
operation, the LSI should preferably be used within the specified electrical characteristics. Failure to meet them can
cause the LSI to malfunction or lose its reliability.
4. Generally, flat package LSIs may have moisture resistance lowered when solder dipped. In mounting LSIs on a board,
it is recommended to use a method which is least unlikely to give thermal stress on the package resin.
371-1.0 S-MOS Systems, Inc. • 150 River Oaks Parkway • San Jose, CA 95134 • Tel: [phone] • Fax: [phone]